-
2000 silverado
How ya doin guys. This is the first forum ive joined. Im not on the inet to much but ive found alot of helpful info on this site, so i wanted to join in! Ive got a 2000 silverado, its currently got a 3 suspension lift (hopefully soon to be replaced with a 6 inch!!) and a 3 inch body lift. Tires are 35x12.50 Mickey Thompson baja claws (sorry not in the pics yet). rite now it doesnt have an engine in it, i just pulled the 5.3 and am swapping in a 6.0 with a cam, aluminum heads, gear drive, and a throttle spacer... also beefing up the original 4L60e. Ive already tore the rearend of it out once, so its already got an auburn carrier and richmond hardened 3.73's..... my other projects are a 67 camaro and a 69 camaro. ill got more pics asap!
-
-
-
welcome im a noob too just gettin the hang of this
-
Welcome, good luck with the truck. Sounds like it will be fun when you get it done.
-
-
Welcome, got some goodies available for ya. 6'' lift and 4.56s
-
How many miles do you hav on the lift and how much wheeling have you done with it?
-
If selling something, please post it in the sale section.
-
-
-
-
Welcome!...Yes, pics of the camaros:naughty:
-
Alright lets see if i can do thais picture thing...... heres the 67, it has a 396 big block bored to 402, (new BIIGGER cam coming soon!), 4 speed muncie w/ a hurst shifter, and 3.73's...... (I kno sumbody will point out that theres sumthing hanging under it, its a cheap offbrand muffler thats coming apart... also being replaced soon with a pair of flowmaster super 44's!) ill have pics of the 69 later... its in the shop....:naughty:
http://www.ls1truck.com/upload/files/340/IMG_1.JPG
-
-
NICE rides. Welcome to the site
-
Welcome. Good call with the 6.0L swap. But one thing--ditch the throttle body spacer. They do thing but make an annoying whistling noise. What size cam you putting in it?
-
-
Welcome. Do you have any specifics on your 6.0 build, just wondering what parts your going with. Should be similar to my truck when done.:thumb:
