Printable View
Ok well forget the springs since they are the bad batch I would like to get $275 shipped for the cam. cam has very light surface rust in one spot I can have it removed
http://www.ls1truck.com/upload/files/279/P4190034.JPG
http://www.ls1truck.com/upload/files/279/P4190040.JPG
Hey TMC, those 918 springs are from the bad batch that they had problems with them breaking. You can call comp,tell them you have a set of 918's with the blue stripe. They will have you send them back to them and they will ship you a brand new set of 918's.
THanks man:thumb:. just the cam is for sale nowQuote:
Originally Posted by foggy
Specs on the cam, and how many miles?
226/236 .525/.525 110 LSA
YouTube - 4.8 silverado cam tuned Idle and rev.
YouTube - Miss My Truck RIP incab idle.
great cam, all top end. MAkes peak arround 6000rpms. and keeps pulling.
I'll ask my bro in law if he wants it.
Thanks jeff for putting the specs up I forgot to. the cam had 1500 miles on it when I bought it but I never installed it due to the fact I decided to go boost.
Here's another clip of what it sounds like
YouTube - ASA cam in ls1
bumpo anyone?
what about the springs r u gonna include them when u get them back?
No this is going to be just the camQuote:
Originally Posted by chuyr
$275 shipped with the rust removed and it'd be good to go?
Would LS6 springs work with this cam or are they a bit too weak?
the yellow LS6 springs are made for this cam.Quote:
Originally Posted by MunsonAuto
Yes the rust will be removed before I ship it. It's very light right at the surface so it should be fine.
bump bumpity bump bump
One last bump and I will be removing it after monday
is 275 firm