anyone know where i can get one for a GM 14 bolt semi floater 9.5? i need one for a axle im building for my trucka. ill even take a used one if its in good shape to keep from running a open diff or a full spool. help me please!
Printable View
anyone know where i can get one for a GM 14 bolt semi floater 9.5? i need one for a axle im building for my trucka. ill even take a used one if its in good shape to keep from running a open diff or a full spool. help me please!
i have my G80 from my 14 bolt. the clutch pak inside needs replaced
or PM mater on here he should have a G86 lying around
MillerMatic.
never heard of millermatic? (no link-n-locker)
whats the diff in a G80 and a 86?
get a detroit locker, there the best one eaton make. dont bother with that true trac crap it for street trucks.
+1Quote:
Originally Posted by 6.0vortecchevy
either weld it or get a detroit. the detroits are cheap for 14 bolts so i would go with it to allow for some give while driving on the road.
i guess 600 bucks is cheap.
try closer to $400
TracTech GM 14 Bolt Detroit Locker
and you can get them used for cheap.
^^^^^^^^lol you go ahead and buy that locker, well i was looking at this one
DETROIT LOCKER GM 14 BOLT 9.5" DET225C-135A
This part that you found is for the GM 14 bolt full-floating diff with 10.5 inch ring gear. It re-uses an open diff case, simply replaces the side & spider gears.Quote:
Originally Posted by youngun
With the semi-floating 9.5 inch ring gear setup that he has, he will need the more expensive diff, and it comes with a diff case, as pictured. :burnrubb:
its to bad i cant just slide in a lunch box locker in mine. if that was the case i would be able to get away with a cheap locker.