Anyone got them?
Printable View
Anyone got them?
Quote:
Originally Posted by DamnYankee
15---13---11---12---14 tiny ones
10----3----1----5----9 under valve cover
7-----6----2----4----8 exhaust
tighten them 1-15
80 ft lbs with 30 wt oil. 63 ft lbs with arp moly lube on 11mm bolts.
6mm bolts get 11 ft lbs with oil or 9 ft lbs with arp moly.
I hope you have the right set. Can't remember what year block you have. 2004+ has all 10 large bolts the same length. Early models have one short bolt on each end of the head under the rocker arm trays.
134-3609 for early
134-3610 for 2004+
bolting patern is the same as stock, i have both specs for studs at home in houston and im in dfw :( but if u have actual bolts i have no clue good luck getting it to work out!
What about for the head stud kit from ARP? Is it the same as the bolt kit?
Nope. Go to their website ARP | The Official Website of Automotive Racing Products and open the catalog. The specs are at the end the catalog. Check the diameter of the studs and the tensile strength to see what torque specs you're supposed to use on the ones you purchased.
So it is dependant on what year model block you have and not the heads???? I have a 01 5.3 block and im wanting to put 04 heads on...
answer the darn question!!!
oh yeah has to do with the block (different bolt hole depths) i was angry when i relised i bought a 04 block and couldent use my 03and older studs so thats what u will need 03 and older
thanks bro