Printable View
Thinking Im going to try and knock this out on my next set of days off.
Anything special needed as far as tools go? I did a pulley swap on my old 91 but that was many years ago and dont remember jack about it. Think we just did it with an impact.
Anyway I have the shorter belt, looking for a place to buy a new bolt for the crank any suggestions?
just get the bolt at your local GM dealer it was under 10 bucks. I think you will need a 3 Pronged Pulley Puller to get the pulley off the crankshaft.
Bring it by here. If Aztenhoffer doesn't have a bolt I have a new one laying on the shelf (GM# 125578400).
Kurt
use a control arm bolt to get it started. Then take out the control arm bolt and use the stock one. IMO get an arp bolt so you dont have to worry about buying ne ones.
FYI getting the stock crank pulley off is no fun!!! I had two friends helping me pull mine off and it took about 2hrs. We had one of the cheaper style pullers so that didnt help... Good luck man, its worth it
Chris
Think I might have to take ya up on that, you gonna be around next weekend?Quote:
Originally Posted by 98aggie
yes
I will drop ya PM sometime next week to work something out, Im stuck at the plant this weekend :(
Scott
OTC Tools 6667 - OTC Harmonic Balancer Pullers - summitracing.com
Used this puller 3 times already, works flawlessly
Quote:
Originally Posted by Beatdown Z
that looks like the harmonic balancer puller for a chrysler, which is what i used and i worked great....u can rent it at orielys
Thats the one I used with the stock pulley. Rod was too short for the LS1 so I made my own, works better than anything else I've used.