what cams u guys run
Printable View
what cams u guys run
get one custom specked for ur application
i know just tryin to get some ideas
i got the gmpp hot cam, rolls my 35 really nice.
Do you have a lifted application or a regular sized 4x4? If you are lifted and looking for some power Id check out the vinci 062 or some lower spec-ed cam for low end torque. Choosing cams also depends on your engine size. I ran a 218/228 LS1 Hot cam on my 4.8 which was way too much. I run Comps 216/220 now on my 5.3 but I am at stock height right now and it hauls ass!
lookin to fit a 285 75 16 tire this summer so i guess it would be lifted
That tire size fits on stock suspension. Are you going to lift it anyway?
Chris
Nelson recommended and sold me the cam in my sig.
Nice low end, I run stock tires -gears- though. Helped gas mileage about 1mile/gal.
ok not lift just level with ford keys and add a leaf in the rear. its my dd and tow/haul rig. but i do take it to the strip once and a while.
Im not exactly a 4x4 off road. But I do have a heavy truck and its AWD. My cam in custom grind 216 220 .586 .586 114. It pulls really good all the way through.
is that cam from thunder racing