drag shocks

QA1's or rancho's

for the rear on a 4 inch drop, need links part numbers, anything that would help on getting these.

the truck is a 99 silverado extended cab, 2 wheel drive, has cal tracs, and belltech 4" drop shackles and hangers with belltech nitro drop shocks, need to figure out what i need for the rear, as the back end is to stiff and the weight transfer is not happening, i got 90/10's coming in to help out, need to figure out what i need for the rear!!!

a real loose shock is a monroe 31000,i had those on my 2 link suspension.
If not ide go QA1.
BTW WHAT IS 90/10?

90/10s are a front drag shock made by lakewood

need the preferred shock fellas !!

havent had that problem yet, but a couple of friends have run the QA1's

Quote:

---

Originally Posted by mean05

havent had that problem yet, but a couple of friends have run the QA1's

---

thanks, i know about the QA1's i guess what i need is a serial or parts# there's so many different ones lol

I dont think QA1 makes shocks for our trucks yet 99 and up...

90/10's on a truck will be fun on the street.

You need the dual adjustable ones.

Quote:

---

Originally Posted by SCIV

You need the dual adjustable ones.

---

thanks SCIV, i know this, theres quite a few different ones, thus the reason i am asking, i thought just maybe someone was running these shocks on there truck already!! thus could give me a part number to order from. the length and travel is gonna make a difference, thus needing it or them for a 4" drop

I run competition engineering drag shocks on the front of mine but I have a sway bar hooked up to it, also. The CE shocks are adjustable to three settings.

i guess they didnt tell u the secret skeet?

most ppl run a 50/50 shock in the rear when teamed up with 90/10s. a 50/50 is basically a stock shock.

try finding the base model shocks for the rear. the cheap black ones not the blue ones.