Ready For A Tune And Cam!!! I Have 05' 5.3 Ho Z71 3.42 Gear Any Suggestions. Should I Install The Converter Before The Tune? Thanks In Advance For The Advice
Printable View
Ready For A Tune And Cam!!! I Have 05' 5.3 Ho Z71 3.42 Gear Any Suggestions. Should I Install The Converter Before The Tune? Thanks In Advance For The Advice
gt 2-3 cam and a 3000 stall. Install them all at the same time.Quote:
Originally Posted by l33z71
WERDQuote:
Originally Posted by ff_jeff
So Install The Cam And Converter Send Off For Tune Right? Where Do I Find Gt 2-3 Cam
No... order the tune... wait for it in the mail... get the tune and install all them at the same time. send your core ecm back in the mail. www.nelsonpeformance.com -------------------- eBay Motors: Lingenfelter GT2-3 Camshaft 350-383-427 LS1, LS2, LS6 (item 160242595281 end time Nov-16-08 06:25:59 PST) here is the cam then go turbo.Quote:
Originally Posted by l33z71
If your not afraid of a used cam, try and get this GT2-3:
eBay Motors: ls1 cam camshaft lingenfelter (item 260305143511 end time Oct-30-08 19:48:23 PDT)
I thought the GT2-3 was mainly a FI cam
Quote:
Originally Posted by ff_jeff
it is, but it makes power na untill he gets a turbo, or supercharges it.Quote:
Originally Posted by brobradh77
How Much Time Are We Looking At For A Cam Swap
You can do it faster once you've done one before but I'd allocate at least 8 hours for your first time.
Its pretty simple. It takes 7 hrs of the 8 just to take everything off that is in the way and put it back on. 50 minutes to get the cam bolt out of the oil pan, 5 to pull the cam out, 5 to put it back in. :lol: jkQuote:
Originally Posted by RedHeartbeat