706 casting patriot heads (assembled)

Printable View

10-08-2008, 12:28 PM
skeet

706 casting patriot heads (assembled)

i ran these heads on my lq9 with the TR224 cam i put down 402 to the wheels with unlocked converter, the compression was 11.5:1 or close to it..heads unmilled.this was with a vic jr intake, which i think robbed som HP at lease some low end tq.

http://i177.photobucket.com/albums/w...Picture121.jpg

asking 900.00 shipped

vic jr intake only.

http://i177.photobucket.com/albums/w...cture114-1.jpg

http://i177.photobucket.com/albums/w...avid_G_001.jpg

may look dull in pics but has been buffed to a shine.. 300.00 shipped

i have other stuff like the tr224 cam, 90 mm tb dbw, but the rules states i need pics, i'll grabs pics of them later..
10-08-2008, 12:50 PM
bangbangskeetskeet

What you want for just the heads?
10-08-2008, 01:24 PM
skeet

asking 900.00 shipped not gonna disassemble the heads, these heads have ss valves, titianum locks double patriot springs so forth
10-08-2008, 02:08 PM
skeet

heres the heads from patriot
https://www.patriot-performance.com/...ome.php?cat=36

the last ones on bottom
10-09-2008, 11:41 AM
bangbangskeetskeet

How do you think these would do on a 6.0?
How much are you asking for the cam?
10-09-2008, 12:24 PM
skeet

Quote:

Originally Posted by bangbangskeetskeet

How do you think these would do on a 6.0?
How much are you asking for the cam?

this head and cam on my setup ( read sig) made 402 rwhp. 373 tq, i feel i lost tq due to the vic jr...

i'll make you a good deal on both pm me... hell all 3 if you want the vic jr
10-17-2008, 09:06 AM
skeet

cam sold, vic jr still up for grabs.

new price vic jr. 275.00 shipped

heads 800.00 shipped

intake elbow sold

also have a dbw 90mm from an ls3 foresale 125.00 shipped
10-17-2008, 09:12 AM
Jamest

What CC are the heads?

I may be interested.

Quote:

Originally Posted by skeet

cam sold, vic jr still up for grabs.

new price vic jr. 275.00 shipped

heads 800.00 shipped

intake elbow sold

also have a dbw 90mm from an ls3 foresale 125.00 shipped
10-17-2008, 09:59 AM
skeet

63cc

heads are untouched as to being milled
10-17-2008, 01:24 PM
Jamest

Sorry too small of a chamber for me.

Quote:

Originally Posted by skeet

63cc

heads are untouched as to being milled
10-17-2008, 01:37 PM
SCIV

What about the rails & elbow for the Vic? Package deal?
10-17-2008, 02:01 PM
skeet

Quote:

Originally Posted by SCIV

What about the rails & elbow for the Vic? Package deal?

the fuel rails/ throttlebody were used on my l92 intake, the elbow has been sold, only the intake left
11-07-2008, 12:10 PM
skeet

intake sold, heads sold