2006 Crew Cab Silverado Mods

Here is my 06 CC and thought I would show some of you what all I have done. I have installed a 216/220 535/535 on a 112 cam, 918 springs, 42 lb injectors, hardened pushrods and a 3000 converter. I also installed a NX MAF kit with bottle opener and heater. I put the purge above my bowtie. I built some custom traction bars too. I am waiting on my aeroforce interceptor gauge to get here since they sent me one for a duramax first. Let me know if you have any questions and let me know what you think.

Also I am fixing to have it all repainted and thinking of two toning it with black up top?? You think that would look good?? Thanks

http://i20.photobucket.com/albums/b2...9-29-08019.jpg

http://i20.photobucket.com/albums/b2...9-29-08020.jpg

http://i20.photobucket.com/albums/b2...9-29-08021.jpg

http://i20.photobucket.com/albums/b2...9-29-08022.jpg

http://i20.photobucket.com/albums/b2...29-08002-1.jpg

http://i20.photobucket.com/albums/b2...9-29-08001.jpg

http://i20.photobucket.com/albums/b2...9-29-08003.jpg

http://i20.photobucket.com/albums/b2...9-29-08004.jpg

http://i20.photobucket.com/albums/b2...9-29-08010.jpg

http://i20.photobucket.com/albums/b2...9-29-08005.jpg

http://i20.photobucket.com/albums/b2...9-29-08006.jpg

http://i20.photobucket.com/albums/b2...9-29-08008.jpg

http://i20.photobucket.com/albums/b2...9-29-08007.jpg

http://i20.photobucket.com/albums/b2...9-29-08017.jpg

http://i20.photobucket.com/albums/b2...9-29-08016.jpg

http://i20.photobucket.com/albums/b2...9-29-08015.jpg

http://i20.photobucket.com/albums/b2...9-29-08014.jpg

http://i20.photobucket.com/albums/b2...9-29-08013.jpg

http://i20.photobucket.com/albums/b2...9-29-08012.jpg

http://i20.photobucket.com/albums/b2...9-29-08011.jpg

http://i20.photobucket.com/albums/b2...9-29-08023.jpg

http://i20.photobucket.com/albums/b2...9-29-08024.jpg

http://i20.photobucket.com/albums/b2...9-29-08025.jpg

http://i20.photobucket.com/albums/b2...9-29-08026.jpg

damn that looks sick. I dunno about the two tone though. I love the plate with the switches. Doesnt trick make those?

Looks sweet!!

Looks awesome! I like the "smoky flames" on your bowtie and engine cover.

Quote:

---

Originally Posted by duckysbht

damn that looks sick. I dunno about the two tone though. I love the plate with the switches. Doesnt trick make those?

---

I got that from Nitrous Outlet. Thanks bro.

Nice looking truck man, looks great!! I think I don't think I'd do the two tone, personally.

Truck looks good! I would have to agree with everyone else about the two tone, I wouldnt do. May some silver ghost flames to go with your flame theme.

Super nice truck, What drop and wheel and tire combo you have? If you two tone i would go with something other than black
maybe a blue or a green. Here is my bro-n-laws. its finshed now but thats the only pic i could find. Just for an idea

http://www.ls1truck.com/upload/files...37;20truck.jpg

Great looking truck man!

Looks sweet!! Now down to buisiness, what does it run?

Quote:

---

Originally Posted by -HIC-

Looks sweet!! Now down to buisiness, what does it run?

---

not sure yet. just been tearing up te streets. need to build the trans and rear before i go to the track. it just spins on the street but it would bite and break at the track. thats how my luck goes.

how big of a shot are you runnin'?

sick truck man leave it white looks clean i wish i had white

leave it all white. super clean man. it's sexy

casey your truck is a piece of trash!!!












just kiddin...glad to see you finally made to a good forum!

nice to see a few crewcabs done up...looks good

thanks brother

looks good. lookin at the traction bars is seems like they would work better if the mounting point on the axle was on top of the axle tube. then the leaf spring would hold the bottom and the traction bar would hold the top. just a thought i may be way off and i dont know if you have the clearance

Quote:

---

Originally Posted by bsj04

looks good. lookin at the traction bars is seems like they would work better if the mounting point on the axle was on top of the axle tube. then the leaf spring would hold the bottom and the traction bar would hold the top. just a thought i may be way off and i dont know if you have the clearance

---

no i didnt have the clearence. the way i built them was pretty much the only way i could. if i would have gone off the axle tube it would have been in too much of a bind to line up with the frame.

Looks good man--nice job on everything! I bet the truck runs well. Have you made it to a dyno or to the track yet to get some times after the mods?

Here is a crappy, real quick PS job of the top half being black...

http://www.ls1truck.com/upload/files...;20truck-2.jpg

Quote:

---

Originally Posted by txarkitekt

Here is a crappy, real quick PS job of the top half being black...

http://www.ls1truck.com/upload/files...%20truck-2.jpg

---

and your telling me alan has terrible PS skills..

Ok SmartASS CS guy. You got any skills? Lets see what kind of job you can do in the 38 seconds it took to p-line the truck and add a 88% opacity black color to his truck.

WHERE YOU AT?!?!?!?!

Quote:

---

Originally Posted by txarkitekt

Ok SmartASS CS guy. You got any skills? Lets see what kind of job you can do in the 38 seconds it took to p-line the truck and add a 88% opacity black color to his truck.

WHERE YOU AT?!?!?!?!

---

haha sorry I was doing constructive things all day. i dont have time to color

Quote:

---

Originally Posted by duckysbht

haha sorry I was doing constructive things all day. i dont have time to color

---

:spit: Sure thing David. Restocking shelves and vacuuming the floor at CVS doesn't exactly equal doing something constructive.

Quote:

---

Originally Posted by txarkitekt

:spit: Sure thing David. Restocking shelves and vacuuming the floor at CVS doesn't exactly equal doing something constructive.

---

you should listen more often. I haven't worked there in months. Ive talked to you about this.

Quote:

---

Originally Posted by duckysbht

you should listen more often. I haven't worked there in months. Ive talked to you about this.

---

Oh, so see, you weren;t working. HAHA, I know fool! I know you sit there on campus behind some Information Desk sipping your all-natural, fair trade coffee while wearing your straw flip flops, grass skirt, and fish net shirt when typing on your cool-ass iBook...all the while you act like you could help someone if they ask a question... :ugh2:

actually I sit in a bat cave

Damn Casey how did i miss ya in here....truck is lookin sweet...I may get you to fab me up some traction bars.

Quote:

---

Originally Posted by brobradh77

Damn Casey how did i miss ya in here....truck is lookin sweet...I may get you to fab me up some traction bars.

---

let me know brother slut!!!!!

Quote:

---

Originally Posted by txarkitekt

Here is a crappy, real quick PS job of the top half being black...

http://www.ls1truck.com/upload/files...%20truck-2.jpg

---

thanks man. that diffently gives me an idea.

god damn your truck is clean as hell...is it a 5.3 or 6.0??? thats hella crazy cause im building like the SAME traction bars you got there...little different tho...i like yer idea alot better!! im in the process of building my 6.0..got 317 heads milled/ported/valve job done, with TSP 228R cam which is a 228/228 588/588 ona 112lsa with 918s and pushrods,longtubes and im goin with an x-pipe with spintechs prolly all the way out the back if i can fit it.....yer truck looks sweet man!!

mines is the 5.3. i have a 6.0 block that I am going to build a 408 sometime. your truck is clean as hell too bro. thanks let me know if you need any pointers on your bars. good luck.