Services Offered

Printable View

08-01-2008, 12:09 PM
SS Killer

Services Offered

I'm a CAD designer/Drafter by day and would like to offer some of those services to you guys. I've done a few drawings for the guys around here locally and would really like to break out into some other stuff. Here are some renderings of designs I've done:

http://www.ls1truck.com/upload/files/141/8%20TBs.jpg
http://www.ls1truck.com/upload/files/141/V2%20Angle.jpg
http://www.ls1truck.com/upload/files...0works%201.jpg
http://www.ls1truck.com/upload/files/141/overall.jpg
http://www.ls1truck.com/upload/files...ter%20REV1.jpg
http://www.ls1truck.com/upload/files/141/coolness.jpg
http://www.ls1truck.com/upload/files...%20Headers.png

I really love this stuff and am excited about getting into more of it. As far as a rate goes, I'm just going to figure it up pre-job so you know what you'll be getting into... hourly guys can kill ya.

PM anytime with any ideas, I'd be more than happy to work with you!
08-01-2008, 12:46 PM
COWL327

Cooo!
08-05-2008, 10:35 AM
SS Killer

I just wanted to clarify guys, I can do design work and analysis. If you want to know if the 1½" tubing is going to be enough to locate your new 4-link rearend set-up, I can tell you. let me know if I can help!

I'll do the first few for free so you guys can get an idea of how this is going to work.
08-05-2008, 01:04 PM
Jeremy K

Wow, That cool to see. I'm a machinist With a little background in CAD/CAM. I take files like that and make them happen. Do you know how to make your drawings into cam files? Lets team up and make that intake. Something I really want to do is work on a turbo set up.
08-05-2008, 01:20 PM
SS Killer

Quote:

Originally Posted by Jeremy K

Wow, That cool to see. I'm a machinist With a little background in CAD/CAM. I take files like that and make them happen. Do you know how to make your drawings into cam files? Lets team up and make that intake. Something I really want to do is work on a turbo set up.

I'm right there with you on a turbo setup. I think that's the direction my truck is headed in.

As far as CAD/CAM stuff, I've got all the CAM software from back in college. I'm a little dusty on speeds and feeds but I could break out the books again. So to answer your question, yes, i can convert my drawings into CAM files. What file type do you all use?
08-05-2008, 01:59 PM
567234ta

you should make us a new logo
08-05-2008, 02:13 PM
SS Killer

Quote:

Originally Posted by 567234ta

you should make us a new logo

"Us" as in LS1Truck.com?
08-05-2008, 03:40 PM
yellowdemon327

i absolutely think you should build an intake like that! i would be one of the first buyers!!!! they are cool as hell!
08-05-2008, 08:02 PM
567234ta

Quote:

Originally Posted by SS Killer

"Us" as in LS1Truck.com?

definately
08-12-2008, 12:53 PM
SS Killer

Ttt
08-27-2008, 08:25 AM
SS Killer

http://www.ls1truck.com/upload/files...ck%20frame.PNG
http://www.ls1truck.com/upload/files...ves%20Deck.PNG

Anyone need a deck designed? And yes, I know there are no supports drawn in.
08-27-2008, 12:25 PM
joakwin

those intakes are sick as hell, i bet that 1st one would make a ton of power
08-27-2008, 01:12 PM
SS Killer

Quote:

Originally Posted by Jeremy K

Wow, That cool to see. I'm a machinist With a little background in CAD/CAM. I take files like that and make them happen. Do you know how to make your drawings into cam files? Lets team up and make that intake. Something I really want to do is work on a turbo set up.

Something like this:
http://www.ls1truck.com/upload/files...pt%205.PNG

i designed this for a twin turbo set-up. And yes, the file is huge... I rendered this and printed it out and now have a 36"x24" poster of it in my garage.
08-30-2008, 04:04 PM
bangbangskeetskeet

that looks so sick!! that wonder if there would be any tuning problems with it tho??? hmmmmmmmmm what would it cost to make something like that?