FS: TBSS/SSR 90mm truck intake manifold

Got one of thems things fo sale! :jest:

Pulled off my truck to do the Vic Jr manifold.

Includes a set of intake manifold gaskets, the little foamy things that go under to keep debris and crap off the valley cover, and a newer Vortec engine cover.

Manifold is in good shape.

Will take "removed" pics later tonight. Here's a pic of the cover installed, I guess you really can't see the manifold :jest:

http://i217.photobucket.com/albums/c...e/engine13.jpg
http://i217.photobucket.com/albums/c...e/engine14.jpg

$175 shipped.

great deal:thumb:

Pics!

Cover
http://i217.photobucket.com/albums/c...e/IMG_2087.jpg

I notched the cover for my throttle cables, and drilled a hole to pass my hose through for the FPR.
http://i217.photobucket.com/albums/c...e/IMG_2088.jpg

Rubber grommets are included (bolts are too, but they are not pictured)
http://i217.photobucket.com/albums/c...e/IMG_2089.jpg

Manifold, a little dirty but in good shape.
http://i217.photobucket.com/albums/c...e/IMG_2090.jpg

Top vacuum port developed a crack that I sealed with JBWeld. No problems since.
http://i217.photobucket.com/albums/c...e/IMG_2091.jpg

http://i217.photobucket.com/albums/c...e/IMG_2092.jpg

Fuel rail bolts and intake manifold bolts are included.
http://i217.photobucket.com/albums/c...e/IMG_2092.jpg

Has a nipple on the back for the vacuum brake booster
http://i217.photobucket.com/albums/c...e/IMG_2093.jpg

Foamy things on the bottom, and intake manifold gaskets
http://i217.photobucket.com/albums/c...e/IMG_2094.jpg

Return style fuel rails with my homemade mounts, if you want them. No extra charge.
http://i217.photobucket.com/albums/c...e/IMG_2095.jpg

Oh, I also have my homemade throttle cable bracket for free too if someone wants it.

http://i217.photobucket.com/albums/c...0331081410.jpg
http://i217.photobucket.com/albums/c...331081410a.jpg

Will this work on a 2006 5.3? Mine is drive by wire what would you have to do to change it?

It will work.

You may need new fuel rails...I dunno if yours will work or not, and you'd need a DBW 90mm throttle body and wiring adapter (Dr X over on pt.net makes them).

Bump, need this gone. Make me an offer!

Would this do anything at all for my truck? LQ9?

Sure would. You'll have to get a 90mm TB to go with it.

Quote:

---

Originally Posted by RedHeartbeat

Sure would. You'll have to get a 90mm TB to go with it.

---

:D Yep.

Bumpity bump. Will entertain offers!

hmmmm.... this is really wanting to get shipped to my house! How much gain could I expect to see?

Well you have a decently high lift cam, so it looks like your airflow would increase by 10 or 11 CFM with the larger manifold. I don't know what this would translate as far as a power gain though.


Intake manifold hard data - PerformanceTrucks.net Forums

http://i221.photobucket.com/albums/d...ow_RatWCCH.jpg

Bump! Any reasonable offer will be considered!

damn it i want this i know its gonna sell before i have the money............****

Ohhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh hhhhhhhhhhhhh

Fine I'll take $125 shipped for it.

pm Sent!!!

Holy dog **** it's finally sold!!!! :D :D