what should i get for my 60e?
Printable View
what should i get for my 60e?
well it sort of depends what your going to be doing with it? Are you gonna tow with it? What size cam are you gonna get if your even gonna get one?
not gonna cam... until the v8 goes in. i just want one that will make me go faster... i dont do any towing.
and yes it will be street driven so i dont want something outrageous!
I udnno maybe put a TB stall in it then? Someone might chime in, but those i think only flash up to like 2400.
That should be good for a v6
like a stock v6 trailblazer?
Wait until the V8 goes in, then swap both at same time.
here is some good info
SilveradoSS.com- The SS/VHO/Vortec Max Enthusiast Forum > TB convertor p#
l8r
if and when youd dyno your 4.3 silverafdo, youll find the torque peak
at the wheels is a moderate 180-200rw torque @ 2900-3000rpm.
2001 Blazer 4.3L
id think about a 2500rpm with a 2.5-2.7STR. the stall would allow the
engine to build power before pushing it through the transmission. the
STR would multiply the torque output on acceleration. i would recommend
a transgo shift kit (converters make the shiftting softer), programming to
rid the TM, and a heavy duty cooler. yes it can be a lil pricey, but it
beats internal engine upgrades and keeps drivability close to stock.
airdeano
ya i was planning on getting a zippy and cooler... but im still not clear on how this whole tc thing works....
No, get yourself a real SK as 'Deano recommends.
you might try this for some info:Quote:
Originally Posted by 05chevyguy
. Yank Performance . Tech Talk
airdeano
so you guys reccomend transgo over zippy?