Pacesetter Longtubes virtually new

Printable View

07-16-2007, 10:33 AM
zeake

I only put on to realize I had a broken header bolt and could only use stockers till I get another engine. I did not want to pull the heads off.

Cerama coated + y pipe for 450.00 shipped to you. As long as you are in the lower 48.

http://store.summitracing.com/partdetail.a...mp;autoview=sku

http://store.summitracing.com/partdetail.a...art=PSM-82-1176

I waited for many months to get these and even longer for the y pipe. They may be available now but who knows.
http://img2.putfile.com/thumb/7/19717084751.jpg

http://img2.putfile.com/thumb/7/19717084735.jpg
http://img2.putfile.com/thumb/7/19717084760.jpg
http://img2.putfile.com/thumb/7/19717084767.jpg
[URL=http://www.putfile.com/pic.php?img=6022048]http://img2.putfile.com/thumb/7/19717084719.jpg
07-16-2007, 10:42 AM
ducky

How much for shipping to 78006. Have you surfaced the face where it meets the engine yet? Any dings or dents from putting them in? Im pretty interested in them..

Edit* nevermind I see it says "450.00 shipped to you"
07-16-2007, 11:16 AM
zeake

<div class='quotetop'>QUOTE(duckysbht @ Jul 16 2007, 10:42 AM) [snapback]99611[/snapback]</div>

Quote:

How much for shipping to 78006. Have you surfaced the face where it meets the engine yet? Any dings or dents from putting them in? Im pretty interested in them..

Edit* nevermind I see it says "450.00 shipped to you"
[/b]

I am going[http://img2.putfile.com/thumb/7/19717084760.jpg/URL]
http://img2.putfile.com/thumb/7/19717084694.jpg
http://img2.putfile.com/thumb/7/19717084677.jpg
http://img2.putfile.com/thumb/7/19717084659.jpg
http://img2.putfile.com/thumb/7/19717084662.jpg
http://img2.putfile.com/thumb/7/19717084639.jpg
http://img2.putfile.com/thumb/7/19717084536.jpg

to try to get pics this afternoon. a few marks/ dings i put them on and pulled them off twice.
07-16-2007, 07:38 PM
ducky

<div class='quotetop'>QUOTE(zeake @ Jul 16 2007, 10:16 AM) [snapback]99614[/snapback]</div>

Quote:

I am going to try to get pics this afternoon. a few marks/ dings i put them on and pulled them off twice.
[/b]

alright cool
07-16-2007, 09:27 PM
zeake

<div class='quotetop'>QUOTE(zeake @ Jul 16 2007, 11:16 AM) [snapback]99614[/snapback]</div>

Quote:

I am going to try to get pics this afternoon. a few marks/ dings i put them on and pulled them off twice.
[/b]

also there is some crud on them from the bottom of the truck and being put on and pulled off twice. The truck was never started with them on.
07-17-2007, 08:19 PM
zeake

TTT for pictures
07-20-2007, 10:41 AM
zeake

Not sold Still got em.
09-06-2007, 02:54 PM
zeake

I would be willing to trade for a wide band and cash or a 3 7/8 whipple pulley for the new style whipple and cash or I would ship them to you for both.
That would work out to about 400 bucks. It'll cost me about 50 to ship the headers and y pipe.
New pulleys from whipple are 129.95 + shipping. Wife says I can't buy anything for the truck for a while. Trades are possible. :)

eBay Motors: AEM GAUGE TYPE 6-IN-1 WIDEBAND UEGO CONTROLLER 30-4100 (item 110165378328 end time Sep-11-07 00:10:42 PDT)

zeake13@yahoo.com
09-06-2007, 03:03 PM
Slimsilverado

Im interested but dont have cash can we work something out????? Pay pal or something electronic? Very interesrted...
09-06-2007, 03:29 PM
Ramsey

Y Do You Have Too Pull Heads Off ?i Used A Right Angle Drill And A Heliacoil.about An Hours Work.
09-06-2007, 05:39 PM
zeake

I spent 3 days with a master certified tech and we could not do it. Me no pulley head. He wanted to I said no. ME pull head me replace engine.
09-06-2007, 07:38 PM
zeake

Quote:

Originally Posted by Slimsilverado

Im interested but dont have cash can we work something out????? Pay pal or something electronic? Very interesrted...

Paypal zeake13@yahoo.com 450.00 with a confirmed adress and they are yours.
Pm me or email me
09-08-2007, 10:03 AM
zeake

Ttt
09-08-2007, 03:17 PM
silver01

I have a 2001 4.8 2WD w/egr will it fit and is that a egr flange in the pic. I have never dealt with LT,s. Do they still use all the O2 sensors, are there flanges already for them and do you have the gaskets.
09-08-2007, 05:59 PM
BSridenguy

I sent you a PM, and would like to buy the headers and y pipe if you still have it. Thanks Trevor
09-08-2007, 09:12 PM
zeake

Quote:

Originally Posted by BSridenguy

I sent you a PM, and would like to buy the headers and y pipe if you still have it. Thanks Trevor

Just waiting on payment.
ThNKA
09-10-2007, 04:55 PM
zeake

Quote:

Originally Posted by silver01

I have a 2001 4.8 2WD w/egr will it fit and is that a egr flange in the pic. I have never dealt with LT,s. Do they still use all the O2 sensors, are there flanges already for them and do you have the gaskets.

Don't know how i missed this but. Gaskets will be needed. Buy new GM gaskets. They have the bungs for o2 and the extensions. They are slip fit no flanges. Yes egr flange is there. You can block it off with a plate and gasket for it cost a couple dollars to make something or just buy a gasket and bolt it up to yours. I am pretty sure they will fit your truck. Someone else may know for sure or check with summit racing there website is set up to tell if they fit.
09-11-2007, 05:10 PM
zeake

Sold and paid for. Will ship Monday morning.
Thank you all.