2000 chevy RCSB going on the dyno after 2pm.
Forged 370ci. 8.9 to 1, 630/634 cam STS T-70 turbo, FMIC , Meth, 15PSI!!!
What do you think it will make?
I think 695hp to 720hp.. But I hope for 750hp
Printable View
2000 chevy RCSB going on the dyno after 2pm.
Forged 370ci. 8.9 to 1, 630/634 cam STS T-70 turbo, FMIC , Meth, 15PSI!!!
What do you think it will make?
I think 695hp to 720hp.. But I hope for 750hp
Hmmm... your guess is pretty close to mine...720HP. I figure HP by NA HP times amount of boost. 14.7PSI should make double NA HP. 29.4 should make three times HP.
<div class='quotetop'>QUOTE(BEATERTRUCK @ Mar 14 2007, 12:53 PM) [snapback]86235[/snapback]</div>THATS THE SETUP I'M GOING WITH. IS IT MAP TUNED OR MAF? I'D SAY 680 -700 HP AT THE WHEELS, BUT I'M NOT ALWAYS RIGHT. I ALWAYS SHOOT LOW, SO ITS A BETTER SURPRISE WHEN IT GOES BEYOND THAT. PUT SOME JUICE ON THERE AS WELL?Quote:
2000 chevy RCSB going on the dyno after 2pm.
Forged 370ci. 8.9 to 1, 630/634 cam STS T-70 turbo, FMIC , Meth, 15PSI!!!
What do you think it will make?
I think 695hp to 720hp.. But I hope for 750hp
[/b]
JAMEST
im with you guys...upper 6's and lower 7's at that boost...
<div class='quotetop'>QUOTE(bud8fan @ Mar 14 2007, 01:48 PM) [snapback]86240[/snapback]</div>Kind of makes you wanna say "That's cool, but what about mine? :cry:"Quote:
im with you guys...upper 6's and lower 7's at that boost...
[/b]
hope i can say upper 7's and mid 8's when it's done!!! :rock: on less boost!!! :eek:
Which truck is that in Dustin...?
he got us all hot and bothered now i guess he's gonna make us wait for tha results!!!!! :yawn:
<div class='quotetop'>QUOTE(bud8fan @ Mar 14 2007, 05:47 PM) [snapback]86259[/snapback]</div>Maybe they had to send the results to the lab to get them analyzed. :lol:Quote:
he got us all hot and bothered now i guess he's gonna make us wait for tha results!!!!! :yawn:
[/b]
Hopefully its not taking so long because he's picking up the pieces and waiting on a tow truck. :laugh:
i was thinking the same thing is it really taking that long to tune that bad boy...lol
its not taking that long. The dyno is in use. We are still hoping for tonight.
I'm thinking 620-650.
There may be a slight slipping of the trans :eek:
I bet there will be some slippage. He's going to be looking for a 4L80E or turbo 400 very soon.
lol yeah that would suck to eat the trans on the dyno but better than going down the road i guess... will at least save on a tow job if it goes out on the Dyno...
585hp, good luck, and keep us posted.
A little update for you guys. I wont tell hp yet as the IAT's are way high,
but I'll tell you this. Last pull the torque was 713ftlbs. No spike or anything. Every run torque was 690 or above.
IAT's are 150+, so we are letting it cool some. This is part of the reason I make my own intercooler set up instead of using STS'.
Will update again shortly.
not bad TQ numbers so far... damn hose are some high IAT's air to air right? what do you try to keep them around 100 or so?
I think its just bad design and what they use for pipe. On the fmic kits I make for the trucks, we never have that problem.
As far as an update, last pull was 595/695 and the trans let gooooooooooooooooooooooooooooooooooooooooooooooo.
I guess we found the limit of his 60e.
damn that has to bite big time... time for the 80e swap or a turbo 400...lol
Nice numbers, get the 4l80E, there is one for sale on tech for 3700 ftl stage 5 4l80 good luck.
DAUM!!! :eek: THAT WAS A 60E!!!!...well it made damn good numbers before it went to it's early grave.... :eek:
Ah, the smell of burned clutches in the evening air. :laugh:
lol yup poor 4l60e... i might be interested in the 4l60e if its not completly trashed... anything can be rebuilt... :) if its a little burned no big deal... at least i know what kind of power it CAN take... :)
well alton, hope you get the 80 before you blow up a 60.
<div class='quotetop'>QUOTE(vv8 @ Mar 14 2007, 09:17 PM) [snapback]86288[/snapback]</div>heheh...i do have an 80e built ready for my truck :smile:Quote:
well alton, hope you get the 80 before you blow up a 60.
[/b]
what is the owners plans for a tranny.....
<div class='quotetop'>QUOTE(farmtruc @ Mar 14 2007, 07:27 PM) [snapback]86278[/snapback]</div><div class='quotetop'>QUOTE(trtturbo @ Mar 14 2007, 08:06 PM) [snapback]86282[/snapback]</div>Quote:
585hp, good luck, and keep us posted.
[/b]
Show off, Allen :laugh:Quote:
As far as an update, last pull was 595/695...
[/b]
<div class='quotetop'>QUOTE(RedHeartbeat @ Mar 14 2007, 08:25 PM) [snapback]86286[/snapback]</div>Don't you get all sappy on us Greg...Quote:
Ah, the smell of burned clutches in the evening air. :laugh:
[/b]
The last #s 595/702 at 4300 rpms. Then the tranny would slip and the #s fell to the ground. Its still got alot left in it!! :thumb:
Do we know the owner?