help!!!!!!!!

ok i no this is the wrong form but i thinkin someone hear will no im mine blown i changed my buddys plugs and wires today and after i changed them the truck is missing bad i check that all the wires were snaped in and the fireing order should be right its a 97 gmc z71 5.7l with the stock dis and i went with bosh plugs and wires any one have a clue it was runnin fine before help!!!

anyone bump

first thing, get rid of the bosch plugs. never seen anything good come of those. in that truck stick with good ol autolites. you must have a wire crossed somewhere. if nothing else, get #1 cylinder on tdc and check rotor position to make sure everything is in order. my .02

Quad 4's won't run with Bosch plugs maybe that one won't either.

All the wires are straight

All the wires are straight it runs its just missin bad

pull the plugs wires on by one and see which on is missin....then pull that plug and see if its firing

none are so could the timeing be off i didin touch the dis

anyone got any ideas

Broken plug maybe.