I need a shopping list

Ok so yeah I am daydreaming but who cares. I am looking for a introductory nitrous system. What exactly do I need? I am thinking about getting a basic kit (any suggestions?) but I assume there will be more stuff that I will need like controllers and such?

There's a killer setup in the classifieds for sale.

Quote:

---

Originally Posted by DamnYankee

There's a killer setup in the classifieds for sale.

---

If the money gets right soon and you still have it I may get it. I have to get this thing running first though. Even if I get that I still have to have electronics and that is what I am looking for advice on...

Any thought on this?

Harris Speed Works :: Nitrous Controllers :: Nitrous Window Switches & Timing Tuners :: The HSW MicroEdge Nitrous Controller

Trick Performance Products Display Controllers

Trick has some awesome products.

Quote:

---

Originally Posted by zeake

Trick Performance Products Display Controllers

Trick has some awesome products.

---

Where do you get pricing from for the trick products?

you will want to change your plugs to a TR6 or so, and if you are not spraying more than 100 I would not worry about a controller. Just use the WOT switch and you will be ok. Depending on your tune you may want to pull timing E.G if you are spraying 100 you probably dont want to run more than 26 degrees of timing. Anything over 125, and you will have to do a bit more homework. I suggest a WBO2 or tuning a wet shot will be a guessing game. Regardless of what you decide on you will want to pull your plugs every so often and check for signs of electrode deterioration or detonation on the porcelin.

Nitrous Plug Pictures and discussion

Quote:

---

Originally Posted by -HIC-

you will want to change your plugs to a TR6 or so, and if you are not spraying more than 100 I would not worry about a controller. Just use the WOT switch and you will be ok. Depending on your tune you may want to pull timing E.G if you are spraying 100 you probably dont want to run more than 26 degrees of timing. Anything over 125, and you will have to do a bit more homework. I suggest a WBO2 or tuning a wet shot will be a guessing game. Regardless of what you decide on you will want to pull your plugs every so often and check for signs of electrode deterioration or detonation on the porcelin.

Nitrous Plug Pictures and discussion

---

Well I was going to start out around an 100 shot and work up to as high as I felt comfortable. I would like to be running 150 to 175 ideally but that will come as I get my wideband and HPt. You think with only a 100 wet I only need a WOT switch with no window and it will be okay. I would guess a FPSS would be need with the 100 shot too.

Trick Performance Products Turbo Kits Front Mount Intro-Kit

Quote:

---

Originally Posted by aarolar

Well I was going to start out around an 100 shot and work up to as high as I felt comfortable. I would like to be running 150 to 175 ideally but that will come as I get my wideband and HPt. You think with only a 100 wet I only need a WOT switch with no window and it will be okay. I would guess a FPSS would be need with the 100 shot too.

---

Here is what you need... And Virg should chime in If I miss something.
You ll need the FPSS
WOT switch
Suggest a MSD window switch if you have a stockish tranny
Wide band a/f is a must
If you want different spray hp levels, get a second stage. PC are bad on solenoids.
Warmer, psi gauge
I have a purge, but its worthless except to scare ricky
Also check your fuel pressure and make sure its ok
Look into a A/F ratio safety switch too.
I'm all about safety and longevity when it comes to stuff like this.
ps I would start at a 50-75 shot to see how the motor likes it first.