74 k-5 5.3L swap

Over this past week i started my 5.3 swap into my 74 Blazer

http://i160.photobucket.com/albums/t...p/DSC00177.jpg
Freshly Painted 5.3L waiting to go into the truck
http://i160.photobucket.com/albums/t...p/DSC00184.jpg
My 74 k-5 waiting to get the engine swap done
http://i160.photobucket.com/albums/t...p/S7300156.jpg
Front Clip Stripped off in preparation for removing the old 350
http://i160.photobucket.com/albums/t...p/S7300174.jpg
All the extra stuff stripped off the 350
http://i160.photobucket.com/albums/t...p/S7300179.jpg
The empty frame rail getting ready to put the new engine in
http://i160.photobucket.com/albums/t...p/S7300186.jpg
Test Fitting the 5.3 in the frame rails
http://i160.photobucket.com/albums/t...p/S7300187.jpg
I had to clearance the engine cross member some to let the engine drop in
http://i160.photobucket.com/albums/t...p/S7300194.jpg
Clearence needed on the exaust manifolds
http://i160.photobucket.com/albums/t...p/S7300197.jpg

More of the swap from this past week

http://i160.photobucket.com/albums/t...p/S7300199.jpg
While every thing was out i primed the firewall in preparation for some paint to make the under hood look a little better

http://i160.photobucket.com/albums/t...p/S7300201.jpg
Hydro 465 Bell housing hooked up to the 5.3

http://i160.photobucket.com/albums/t...p/S7300205.jpg
Transmission installed onto the engine

http://i160.photobucket.com/albums/t...p/S7300211.jpg
engine and transmission installed into the truck

http://i160.photobucket.com/albums/t...p/S7300217.jpg
the engine mostly wired and put together

http://i160.photobucket.com/albums/t...p/S7300231.jpg
Mostly back together now

Is that John Deere green?

Quote:

---

Originally Posted by RedHeartbeat

Is that John Deere green?

---

its is supposed to be hunter green, i am not happy with it i want to go darker green

i am doing the rust repair on my 87 K-5 now, have a 5.3 4l60 will be installing soon, hope you get it done first and then can tell me the easy way!!! good luck

sweet! it looks like you got everything moving right along. love the orange on the block.

Quote:

---

Originally Posted by duckysbht

sweet! it looks like you got everything moving right along. love the orange on the block.

---

thanks there is no better color for a chevy motor than orange

Quote:

---

Originally Posted by blander66

thanks there is no better color for a chevy motor than orange

---

haha damnn straight

i'm gathering information for a similar swap.

will you be using a/c? does it look like there would be frame to compressor interference on the pass side?

Quote:

---

Originally Posted by randybill

i'm gathering information for a similar swap.

will you be using a/c? does it look like there would be frame to compressor interference on the pass side?

---

I am not using AC thats why i have a convertable :rock:

From the looks of it i do think that that would be the biggest area for clearence issues you sould have to do some cutting and welding to reinforce the frame