Gears, Posi's, Lockers, Bearings, Axles, More!

Printable View

Show 40 post(s) from this thread on one page

03-11-2011, 09:06 AM
RONS MACHINING SERVICE

Quote:

Originally Posted by Hellcamino

I'm looking for a posi and some 4:10gears for a 03 silverado v6 how would I know if I have the 8.6 or 8.5

Hello, in 2003 it will be he 8.6 rear.

Thanks, Ron
1-800-694-3098
04-22-2011, 04:50 PM
Chris092183

Hey Ron

How much for a detroit locker, gears and install package for a 75 blazer?

i believe it has a 10 bolt 8.5 rear and maybe a 44 front?

Thanks,
Chris
04-25-2011, 08:17 AM
RONS MACHINING SERVICE

Quote:

Originally Posted by Chris092183

Hey Ron

How much for a detroit locker, gears and install package for a 75 blazer?

i believe it has a 10 bolt 8.5 rear and maybe a 44 front?

Thanks,
Chris

Hi Chris, are you sure it is the 10 bolt rear? In 1975 it should be the 12 bolt.

Thanks, Ron
1-800-694-3098
07-18-2011, 02:01 PM
kerrige

I am looking to do a some slight upgrades on a budget. Do you offer an G80 options for a 2000 sierra1500? Maybe with some 3.73's or 3.90's?
07-25-2011, 09:48 AM
RONS MACHINING SERVICE

Quote:

Originally Posted by kerrige

I am looking to do a some slight upgrades on a budget. Do you offer an G80 options for a 2000 sierra1500? Maybe with some 3.73's or 3.90's?

Hello, sorry for the slow response. We do not offer the G80, but we do have aftermarket posi differentials and gears to fit your application.

Thanks, Ron
1-800-694-3098
07-26-2011, 05:54 PM
T-Stark

would like to know the price on a true track with 3.73 or 4.10s for a 89 c1500 silverado

thanks!
08-01-2011, 08:43 AM
RONS MACHINING SERVICE

Quote:

Originally Posted by T-Stark

would like to know the price on a true track with 3.73 or 4.10s for a 89 c1500 silverado

thanks!

PM sent, Thanks!
08-01-2011, 10:57 PM
scarybowtie

Hey Ron, I have a 95 z71 and was wanting to get the best price I can on 4.56s front and rear and a true trac for the rear. And any seals or what not I would need to install them. Thanks!
08-03-2011, 04:23 PM
RONS MACHINING SERVICE

Quote:

Originally Posted by scarybowtie

Hey Ron, I have a 95 z71 and was wanting to get the best price I can on 4.56s front and rear and a true trac for the rear. And any seals or what not I would need to install them. Thanks!

PM sent, Thanks!
08-03-2011, 05:53 PM
graysilverado5.3

PM how much for some GM 4.56's gears for a 09 silverado. Both rear and font gears since its a 4x4.
08-05-2011, 03:14 PM
RONS MACHINING SERVICE

Quote:

Originally Posted by graysilverado5.3

PM how much for some GM 4.56's gears for a 09 silverado. Both rear and font gears since its a 4x4.

PM sent, Thanks!
08-05-2011, 05:29 PM
kerrige

Do you carry Valuetrac?
08-09-2011, 10:50 AM
RONS MACHINING SERVICE

Quote:

Originally Posted by kerrige

Do you carry Valuetrac?

Hello, yes, we offer the Valuetrac differentials.

www.ronsmachiningservice.net

Thanks, Ron
1-800-694-3098
08-09-2011, 04:23 PM
kerrige

Please send me a PM with the best price for a complete install kit with a valuetrac and 3.90 gears for a 10 bolt 2000 sierra 2 wheel drive. Thanks :)
08-11-2011, 10:32 AM
RONS MACHINING SERVICE

Quote:

Originally Posted by kerrige

Please send me a PM with the best price for a complete install kit with a valuetrac and 3.90 gears for a 10 bolt 2000 sierra 2 wheel drive. Thanks :)

PM sent, Thanks!
08-11-2011, 10:04 PM
sloCaddy

price for 4.30 gears and install kit: 2wd 03 escalade. will be ordering next week:burnrub:
08-15-2011, 11:06 AM
RONS MACHINING SERVICE

Quote:

Originally Posted by sloCaddy

price for 4.30 gears and install kit: 2wd 03 escalade. will be ordering next week:burnrub:

Hello, we can offer a 4.30 gear with master install kit for $265.00

Thanks, Ron
1-800-694-3098
08-16-2011, 10:44 PM
sloCaddy

thanks, will call soon
08-17-2011, 06:45 PM
Darrel From Meraux

Hey man im looking for a set of 3.90 gears for a 2008 sierra 4x4 10 bolt. I've looked everywhere and cant seems to find them for the front diff. Do you carry them?
08-18-2011, 04:52 PM
RONS MACHINING SERVICE

Quote:

Originally Posted by Darrel From Meraux

Hey man im looking for a set of 3.90 gears for a 2008 sierra 4x4 10 bolt. I've looked everywhere and cant seems to find them for the front diff. Do you carry them?

Hello, sorry, no 3.90's for the 8.25 IFS. Thanks for checking in!
08-26-2011, 02:49 PM
Darrel From Meraux

Ron, PM your way sir.
08-30-2011, 03:44 PM
RONS MACHINING SERVICE

Quote:

Originally Posted by Darrel From Meraux

Ron, PM your way sir.

PM answered, Thanks!
08-31-2011, 12:49 AM
sloCaddy

got gears installed tonight, Ron do motives have a break in procedure? what is it?
09-02-2011, 10:36 AM
RONS MACHINING SERVICE

Quote:

Originally Posted by sloCaddy

got gears installed tonight, Ron do motives have a break in procedure? what is it?

Hello, yes, all gears should go through a break in procedure. You will need to go on short trips (15-20 miles) then let them cool down. Avoid an long distance trips for the first couple hundred miles. No towing for the first 500 miles. The oil should be changed after the 500 mile break in period.

Thanks, Ron
09-02-2011, 12:31 PM
Green Machine

Whats up Ron got a question on the value trac. Is it the same quality as the Detroit true trac. Any one else chime in if you have the value trac in your truck
09-02-2011, 07:23 PM
lechez71

Quote:

Originally Posted by Green Machine

Whats up Ron got a question on the value trac. Is it the same quality as the Detroit true trac. Any one else chime in if you have the value trac in your truck

i was goona get a value trac for my truck but its not offered in a 28 spline, so got the Detroit trutrac. your axles are 30 spline it will work for you, rom told me its basically the same just different name.
09-05-2011, 04:45 PM
Green Machine

Quote:

Originally Posted by lechez71

i was goona get a value trac for my truck but its not offered in a 28 spline, so got the Detroit trutrac. your axles are 30 spline it will work for you, rom told me its basically the same just different name.

What gear did u have before u went to 4.11s
09-05-2011, 04:55 PM
lechez71

Quote:

Originally Posted by Green Machine

What gear did u have before u went to 4.11s

i had a 3.08 before. now with the new gears the truck feels lighter big difference.
09-05-2011, 08:47 PM
RONS MACHINING SERVICE

Quote:

Originally Posted by Green Machine

Whats up Ron got a question on the value trac. Is it the same quality as the Detroit true trac. Any one else chime in if you have the value trac in your truck

Hi, the Valuetracs have been working very well, I've been getting good feedback on them.

Thanks, Ron
09-05-2011, 10:27 PM
Green Machine

Quote:

Originally Posted by RONS MACHINING SERVICE

Hi, the Valuetracs have been working very well, I've been getting good feedback on them.

Thanks, Ron

Thanks Ron how much for the valuetrac with 4.10s. I will be ordering 1 at the end of this month
09-12-2011, 05:31 PM
RONS MACHINING SERVICE

Quote:

Originally Posted by Green Machine

Thanks Ron how much for the valuetrac with 4.10s. I will be ordering 1 at the end of this month

Sounds good, we offer a package with a Valuetrac, 4.11 gears, and a master install kit for $495.00

Thanks, Ron
1-800-694-3098
09-23-2011, 04:13 PM
RONS MACHINING SERVICE

PM answered, Thanks!
01-19-2012, 08:09 PM
if99

Can I get a price on a detroit truetrac, 3.73 gears, and everything I will need to put them in a 2005 Silverado.
02-16-2012, 11:56 PM
country_3030

I need the price on a valuetrac and bearings for 8.6.
02-17-2012, 01:15 PM
K11PER

I noticed 10 bolt and 14 bolt in the first post, I would assume you have 12 bolt stuff as well?
02-19-2012, 09:10 PM
country_3030

Made my order for valuetrac and carrier bearings.
02-21-2012, 09:09 AM
RONS MACHINING SERVICE

Quote:

Originally Posted by K11PER

I noticed 10 bolt and 14 bolt in the first post, I would assume you have 12 bolt stuff as well?

Hello, yes, we offer 12 bolt parts also. Please browse our website or give us a call.

Thanks, Ron
1-800-694-3098
02-21-2012, 09:09 AM
RONS MACHINING SERVICE

Quote:

Originally Posted by country_3030

Made my order for valuetrac and carrier bearings.

Thanks for the order!!
03-18-2012, 04:02 PM
20''strong

Got my valuetrac installed.......night and day difference compared to the g80.thanks ron.
03-19-2012, 06:44 PM
RONS MACHINING SERVICE

Quote:

Originally Posted by 20''strong

Got my valuetrac installed.......night and day difference compared to the g80.thanks ron.

Sounds good, thanks for your support!

Show 40 post(s) from this thread on one page

All times are GMT -5. The time now is 06:06 AM.