flaco's 9.7x pass

Quote:

---

Originally Posted by Quik

i just dont like those heads and never once seen a large cube make any kind of impressive number.

if you decide you want a large motor sell those heads of yours and buy some real heads some trickflows, AFRs or ETP. remember in performance you get what you pay for and flaco has the good parts use him as an example

---

oh trust me!! hes my hero lol!!! we done discussed this, trickflows will be the way to go when time comes ;)


large motor coming next spring ;)

Quote:

---

Originally Posted by Quik

so you could almost say you have a 3/4 race cam lol. almost .750 lift is crazy and going to take guess duration at .05 is probably high 50s/low 60s and a nice tight lsa i would guess. which makes total sense now on that elbow and single plane intake

12pt very nice!!!!

---

Bigger

Quote:

---

Originally Posted by flaco

Bigger

---

**** my son, and idle clips of the new cam? and i bet that fawker doesnt start to pull away till like 5k anyways

Quote:

---

Originally Posted by Quik

**** my son, and idle clips of the new cam? and i bet that fawker doesnt start to pull away till like 5k anyways

---

it idles at 1200, i'm not gonna say it drives like a cadilac but the powerband is insane. normal driving it around town and freeway at cruising speeds it still wants to cam anything below 3000. but crack that throttle open and it like whoaaaaa

Quote:

---

Originally Posted by flaco

it idles at 1200, i'm not gonna say it drives like a cadilac but the powerband is insane. normal driving it around town and freeway at cruising speeds it still wants to cam anything below 3000. but crack that throttle open and it like whoaaaaa

---

hahahaha and burnouts doing 70!!!! lol

Quote:

---

Originally Posted by flaco

it idles at 1200, i'm not gonna say it drives like a cadilac but the powerband is insane. normal driving it around town and freeway at cruising speeds it still wants to cam anything below 3000. but crack that throttle open and it like whoaaaaa

---

im surprised that isnt solid tho. what lifters you running? Caddy's? and im guessing there is some shimming going on with those springs. so have you opened that exhaust up since the first cam? last i checked itwas only 3" back.

i had ran off those headers you have. 3.5 to 3" off each collector into a custom made X then into two magnapaks and out the side. all 3". believe it or not but that front pipe i had made with the X would probably fit easily on a fbody

Probably has a rev kit and slight clearance like a solid.

Thats just friggin amazing

when are you coming to the valley Flaco? would love to see that biatch run

Quote:

---

Originally Posted by CASPER-08

when are you coming to the valley Flaco? would love to see that biatch run

---

im going to be there the 19th on friday. will be leaving from here the 17th wed.

looking forward to meet you