Need info. Has this ever happend or have you heard of this happening.

Quote:

---

Originally Posted by danger_ranger83

If i remember correctly the middle is the largest and then 2&4 are a bit smaller then 1&5 are the smallest

---

I'm not trying to ding on you here, but wanted you to think about what you are trying to say ... if the 1 & 5 were smaller, you wouldn't be able to get #2, #3, or #4 past #1. If they are different sizes, it would have to be #1 being the largest and going smaller from there back, with #5 being the smallest. I hope this makes sense.

Outside diameter....

lawlz

Either way aside from oil pump the bottom end is assembled.... Heads will hopefully be on tomar as well as the valley cover knock sensors etc.