building it myself???

so any suggestions on where i should run the hot side pipes for this??

:pics:

sadly i dont have any...seeing how i havent started with it yet
right now im trying to get an idea of what ill need to buy, in terms of piping and what not. im also looking for a small enough oil resovure for a self contained oiling system for the turbo.

Unless you are good with bending pipe, welding, and on site fabrication--I would almost resort back to just saving up some money and buying a setup. Or maybe find a used kit and buy a new turbo, BOV/wastegate, etc.

Tyler, I doubt seriously you could reach halftrack with me on a front mount 80.. I am almost inclined to say you could not pass 1/8 while I trip the 1/4 beams just how my truck sits. Although you have me hands down in the clean truck look department, my truck is purpose built to get the win light. I guess we will never know at this point b/c my truck is down for a standalone and second stage. I have to give it to you though b/c I can only haul around duel ass, while you could fit at least 6 small asses in that truck of your's@@
:tvhaha:

Quote:

---

Originally Posted by -HIC-

Tyler, I doubt seriously you could reach halftrack with me on a front mount 80.. I am almost inclined to say you could not pass 1/8 while I trip the 1/4 beams just how my truck sits. Although you have me hands down in the clean truck look department, my truck is purpose built to get the win light. I guess we will never know at this point b/c my truck is down for a standalone and second stage. I have to give it to you though b/c I can only haul around duel ass, while you could fit at least 6 small asses in that truck of your's@@
:tvhaha:

---

lol he was talking about moze im pretty sure

Quote:

---

Originally Posted by txarkitekt

I know a member that went that route--and his truck runs like crap... :lol:

---

This is where I was talking about Moze--and was TOTALLY messing around...

Quote:

---

Originally Posted by bangbangskeetskeet

i bet he will still smoke you tyler

---

Yes, I know...

Quote:

---

Originally Posted by txarkitekt

LOL--yeah, a RCSB truck with an LQ4 and a long list of mods with a sweet 80mm should be able to walk me easily. I mean, come on--I've only got a little 5.3L in a heavy ass ECSB truck. But then again, so did that clown in the Camaro SS the other night... :D

---

Like I said--a truck with those mods should smoke me easily...

Quote:

---

Originally Posted by -HIC-

Tyler, I doubt seriously you could reach halftrack with me on a front mount 80.. I am almost inclined to say you could not pass 1/8 while I trip the 1/4 beams just how my truck sits. Although you have me hands down in the clean truck look department, my truck is purpose built to get the win light. I guess we will never know at this point b/c my truck is down for a standalone and second stage. I have to give it to you though b/c I can only haul around duel ass, while you could fit at least 6 small asses in that truck of your's@@
:tvhaha:

---

I think my truck would put up a closer race than that. It runs a 9.1 1/8th. And I don;t launch very high rpms. My mods are for higher rpm power--and I think that I would have better 1/4 times than what the 1/8th-to-1/4 calculator would show. If I use the conversion, math says I should be looking at a 14.1 1/4 mile time. I think my truck has high 13's in it.... If I strapped on some slicks and launched at a higher rpm, I would get out of the hole quicker and have better times all around. But still, I am not claiming my truck to be the fastest around by any means... As our trucks sit, you would have me by at least 2 secs through the 1/4 timing lights. I would need to be running a 12 sec 1/8th for you to be beating me like you said...

Quote:

---

Originally Posted by duckysbht

lol he was talking about moze im pretty sure

---

THANK YOU DAVID.