Yeah, the efans are already done, and we should be able to get a lot done Friday night. There a re a couple of new things to do (cam swap and fuel pump) but we definitely have the manpower, so it should go really good.
Printable View
Yeah, the efans are already done, and we should be able to get a lot done Friday night. There a re a couple of new things to do (cam swap and fuel pump) but we definitely have the manpower, so it should go really good.
Well, the new cam should go in the motor before we drop it into the truck. That will only take an hour or so... Fuel pump will be easy too--we can just unbolt the bed and lift it off--with everybody there, it should go quickly. I might get a chance to steal away on Friday and get over to Virgil's after work and we can start the small stuff first.
that would be great cause we were looking at getting the fluids drained and getting the cam swapped into the motor on friday.Quote:
Originally Posted by txarkitekt
All i have in air tools is a cheesy 1/2" impact gun....but i do have a decent compressor and a single air hose
Send address to those of us that don't know where Virgil resides. :thumb:
i will pm Moze with my addy and he can send it out to all of you guys
We'll be starting at about 8:00 on Saturday morning guys. :thumb:
if you guys need someone to stand there and hand you tools pm the address and i'll be there, or if you an oil change or something. :LOL: let me know man my wife works a double on saturdays so i dont need to be back til sunday.
well i wont be there early in the AM... but hopefully i can work a short day
Ok, I've got the following loaded in my truck, am I missing anything:
Headers & gaskets
Sockets
Rags
5 gallon bucket
Oil drain pan
6 quarts of AMSOIL
AMSOIL oil filter
New accessory and AC belts
2 gallons of coolant
8 quarts of transmission fluid
Hood bolts outlined with a Sharpie
Cat litter
PCM
Box of elastic gloves
Prybar
Fast Orange hand cleaner
Two bottle jacks
New Cam
Cordless reciprocating saw & blades
Cordless drill & bits (never know)
Engine hoist, Jack stands, Grease gun, gear wrench ratchet wrenches, screw drivers, pry bars, header band clamps if you bought some, drinks, shop towels, hand cleaner, bottled water, safety glasses, creeper, hoist chains and engine leveler, lots of 3/8" drive extensions....