Dyantech Motorsports?

Hey BCOSSETTE,what're you going to have done.I need ideas :nutz:

BCOSSETTE has the right idea to avoid Oscar. :puke:

Was wondering if you guys had recieved your stuff from Dynatech and the condition it's in.

Still working on my harness and haven't recieved my cruise yet. :tantrum:

Thanks for the heads up. I'm never buying anything from them...
I can't believe they asked if you think you're their only customer...does that mean they can lie and keep putting off shit?
What does the 1st amendment say again? Oh yea, free speech. He threatened you with a lawsuit for putting down his company? Guess what...it's only libel/slander if what someone says ISN'T true. Tell him to kiss your ass
:nutz:

I am waiting for mine still. He sold me a tach module said he is waiting for it. I talked to the person he gets them from and the guy says he never ordered one from him, BakerElectronix.com. Also, Oscar modified my harness, Okay. Good job. Also in the contract for work he was to test the ECM and put it on a scope and make it work with VATS module. He was also supposed to test fire it on his test engine. This could not have happened since my engine will not run for more than a second. Oscars's work for the harness modification was good but the rest of the contracted work was crap. I told Oscar I was sending a ECM that was from a 2001 Corvette and that it would need to be setup to work with the f-body wiring harness. He said "That will be no problem". Now I have the truck ready to go and I cannot go anywhere running just one second at a time. Now I am probably going to be out the expense of getting the computer reprogrammed somewhere else. Damn, how am I going to ever get this thing going with all the delays!!!

I guess I should have checked with the Better Business Bureau before doing business over the internet. It pays to report any company that does not do what you paid for, be it services or products. If it does not save you a headache, maybe it will save someone else a headache in the future. The BBB is made to protect us from poor performing companies and forums like this will shine the light down the dark alleys some companies like to do business in.

Hey Greg,
Just went through all the same BS with mine.

It's only running for a second because the VATS is shutting down the injectors.

bakerelectronix@verison.net has a by-pass module

If your truck has Vats you can put a resistor in.I got one from Bandit,but had to go with the module '82 El Camino.Took about 10 minutes to install.

Baker electronics seems to have it together,answered my e-mails immediatly.

Not like someone else :bash:

what year ecm are you running. Baker thinks I need a body control module to go with the VATS module but wasn't sure. My 2001 doesn't work with their VATS module all by itself. I have the module and Baker said the voltages I am getting are correct on the blue wire.

I got one from Bandit,but had to go with the module '82 El Camino.........couldn't figure out what you were trying to say here.

I will be out in Anaheim in May. I will get to pay them a visit in person and report to everyone if he is truly as busy as he says he is. Believe me, if I don't get satisfaction before I go out there in May I will be coming home with a big smile on my face.

I don't know about everyone else but I cannot get to his web site at this time. Even going through Google his web site is down. He is not answering his phone again, too. I believe Ebay pulled all his ads, also.

I've got an LT1 running a '97 f-body PCM .

Bandit sent a resistor kit,but you have to have a passkey module.It's for original equipment.Your truck didn't come stock with VATS.I used Baker's module by itself.

2001 should be talking the same computer language as mine.Still haven't got all those VPM's and ISO's figured out.See if I can find out what program your's runs.

The signal to the PCM from the module should be in Hz.

Think Bandit was better than me with this stuff. :duh:

I've got most of this stuff written down at work,see if I can gather it up tomorrow.

Surely we can get it figured out. :nutz:

Thought about going to LA myself in MAY,definately going to San Antonio,might make LA.

Got this guy's # off the website Michael Merchant 562-694-6345
I called and he said he'd see if he could get ahold of Dynatech,hasn't called back.
Might call again at 3 am :bash:

yeah, 50 mhz for ls1 and lt1s and 30 mhz for early lt1 92 and 93 as far as I can remember.