the install looks clean, the only thing i would do is put the wires in some little plastic tube(wire loom) or something so the wont look bare and they can look more stock.
Printable View
the install looks clean, the only thing i would do is put the wires in some little plastic tube(wire loom) or something so the wont look bare and they can look more stock.
<div class='quotetop'>QUOTE(chev5.3 @ Oct 11 2006, 03:54 PM) [snapback]68873[/snapback]</div>Yeah that was what i was thinking also To buy that black tube so that it can look more factory like you said.Quote:
the install looks clean, the only thing i would do is put the wires in some little plastic tube(wire loom) or something so the wont look bare and they can look more stock.
[/b]
hey man have you noticed the temps the same or what? also if you want to lower the truck mre from the back buy some hangers, altough you can also lower it by removing a leafspring, i have mine like that.
The temps stay about the same as before, maybe a bit less. I want to lower my truck completely maybe a 2-4 or 3-4,5 drop.
i have about a 3/5 on mine, what they did was cut a round on the spring, and on the rear i removed the leaf spring, the only thing i load my truck with is an atv and it does the job, if you want you can see the truck in person, it does not ride that bad i have air shocks. I had the kit i have had the 4/6 and the 3/5 both kits and the truck rides the same.
<div class='quotetop'>QUOTE(chev5.3 @ Oct 11 2006, 04:40 PM) [snapback]68884[/snapback]</div>was that the helper spring that you removed?Quote:
i have about a 3/5 on mine, what they did was cut a round on the spring, and on the rear i removed the leaf spring, the only thing i load my truck with is an atv and it does the job, if you want you can see the truck in person, it does not ride that bad i have air shocks. I had the kit i have had the 4/6 and the 3/5 both kits and the truck rides the same.
[/b]
I removed the leaf spring in the middle, so right now i just have the big leaf spring and the small one. I have also had it like this with the shackle and it vas very low, the truck looked great but i would scrape everywhere, and on the front i have close to 2 rounds cut on the spring.