I used an industrial die grinder to elongate the holes. Spent about 20 minutes to complete the job.
Printable View
I used an industrial die grinder to elongate the holes. Spent about 20 minutes to complete the job.
thanks!! I actually just finished grinding mine... Had to hook up the air .....dremel wasnt cutting it... literally.
got my flexplate bolt holes elongated...
https://scontent-a-atl.xx.fbcdn.net/...28613254_o.jpg
https://fbcdn-sphotos-g-a.akamaihd.n...12006771_o.jpg
Got some fuel line parts in...
https://fbcdn-sphotos-e-a.akamaihd.n...41838495_o.jpg
Also got my engine in the bay today..... almost.... the motor mounts are in but for some reason it doesnt want to slide back enought to allow me to easily mount my bellhousing.. the pass side slides back but the drivers side seems bound somehow... Nothing is obstructing it but it wont move... I am about an inch off...
https://scontent-b-atl.xx.fbcdn.net/...16471576_o.jpg
https://scontent-b-atl.xx.fbcdn.net/...89586235_o.jpg
https://scontent-a-atl.xx.fbcdn.net/...62897201_o.jpg
Looks awesome, love where you mounted the computer, I mounted mine in the same place.
Quote:
Originally Posted by 2drhoe
You're not having problems with the ring gear/spacer are you? Just wondering if it's hitting the torque converter or not. Or if the torque converter is seated onto the pump far enough.
No... I figured it out today... My drivers side wouldnt slide far enough back.. turns out there was a ground bolt i forgot to take off that was hitting my motor mount adapters.... I took the bolt off and the motor slid right up to the bellhousing and I bolted it up... sometimes you just got to walk away from it for a bit and clear your head and the problem will come out...
motor is in!!!!!!! Turns out there was a ground bolt in the way keeping me from sliding it back to the trans.... anyhoo... got my intake today and I threw it on there to see how it fits.. Its coming together...
https://scontent-a-atl.xx.fbcdn.net/...99887752_o.jpg
https://scontent-a-atl.xx.fbcdn.net/...34968736_o.jpg
https://scontent-a-atl.xx.fbcdn.net/...97144120_o.jpg
https://fbcdn-sphotos-c-a.akamaihd.n...95005182_o.jpg
Glad it was something simple.
What did u do with the mass air flow sensor???
its sitting on my shelf.. I just threw the intake on to test the fitment...