don't forget the resister
Printable View
don't forget the resister
Here is the small connector on the trans heving trouble finding anything on the big one.
Attachment 5955
yea that one goes the ls harness and the other one goes the the 96 harness right? the big one is the one giving me problems. i broke the switch and i might be able to salvage the plug. but here it is as i pulled it out.Quote:
Originally Posted by wayoung
http://i1105.photobucket.com/albums/...y/IMAG0644.jpg
so far i found where everything goes except for one of the lt green wires.
also the guy who tunes my pcm send me a replacement switch with the plugs and everything already attached. but its a little different than the one that came in my truck. so are the wires in the harness.
(far left is replacement other 2 came off my truck)
note the different color wires,
http://i1105.photobucket.com/albums/...y/IMAG0643.jpg
oh and here the finished product as per your instructions
http://i1105.photobucket.com/albums/...y/IMAG0653.jpg
http://i1105.photobucket.com/albums/...y/IMAG0648.jpg
thing is tiny now lol! they are a few more plugs that are still connected and i dont knw where they go. ill take a pic later and pst it. they look like evap stuff im not sure
Here is what i found hope it helps I'll keep looking though
Attachment 5957
yea now i see what wires are needed. awesome! now i just need to find them in the harness and ill be good to go..
Good glad I could help.
resister for the tach?
2003 pcm I believe is the only one that needs the resistor on the tach line.
O ok well I scratched my head for days trying to figure out why it didn't work till I remembered it.
Got a problem now truck won't shift at wide open throttle I guess i'll have to a scan tool and check the TPS. But if it's a middle case leak does any know what's envolved to fix this.