60' times on stock suspension

Some of y'all are cuttin pretty good 60s on stock susp

you all think since i have no overload leaf spring,,it was causing my wheel hop?

I'd say yes.. To much axle wrap will cause wheel hop.

Quote:

---

Originally Posted by CHEVROLADE

damm nice^^ cause cal tracs are to help your 60' and is not factory...best e.t i cut was 2.0 with cal tracs

---

Cal trax are to help your 60 foots.. they help axle wrap and reduce wheel hop.. they control the rear axle... They dont help traction on the street if anything they make it worse because its much more rigid... Blown06 went 1.57 rcsb Mitch went 1.62 ecsb

Quote:

---

Originally Posted by CHEVROLADE

you all think since i have no overload leaf spring,,it was causing my wheel hop?

---

Get spring clamps from Autozone for 18.00 Yes the overload being gone is why u have axle hop and also your shocks are prob no good old/wrong length/to tight/missing?

Homemade caltracs, 4/6 drop and 28x10x16 here. Best on motor was 1.77 and 1.64 with a 150 shot. Shooting for 1.5x with the Turbo setup. Stall and gears and slicks make a huge difference. It just sits and gets with the traction bars

My old setup on 28" Drs went 1.76 60' with nothing but a spring clamp, Stock shocks, 2" drop shackles.

*off topic- Did you get an extra inch drop on clamping ur leafs?

clamping the leafs will cause it to drop some more in the rear

2.2 with the 4.3, 3.23's and stock 245/70s. Haven't been back since.