Lesson learned: REGRIND CAM

Quote:

---

Originally Posted by WARLOCK

Regrind from Plano texas?

---

Quote:

---

Originally Posted by PEARL JAM

Dont know, it was an Ebay buy, heres a link to the sellers current sales:

LS1 Performance cam HR 288 (fresh copy):eBay Motors (item 170419411028 end time Dec-19-09 10:51:06 PST)

---

Yup, thats the guy.

Quote:

---

Originally Posted by zeake

I would try to get a partial refund or anything at all. I would not use a regrind period. I am just that way. Does he heat treat these regrinds? Really like a key copier. Bovine Excrement. Another reground cam is garbage period. I would write it off as lesson learned.

---

HUGE +1.

Quote:

---

Originally Posted by PEARL JAM

Thats EXACTLY how mine is damaged. looks like the areah where new metal has been machined onto the cam?

---

A regrind take the special heat treat off the cam lobes, making the lobes soft and suspect to flattening out. Once a flat spot occurs, it doesn't take long to make a groove on the cam lobe and mushroom the lifter. I don't see any use in going after him. I would file a complaint with Ebay and spread the word.