lookin good!
Printable View
lookin good!
I like that fuel tank! Looks awesome!
Update, Update Update.
So after reworking my radiator mounts, re-installing my fans, I installed the f-body bracket and and built a small support bracket for it. To provide fresh air, I installed an 06 CTS-V intake.
http://www.ls1truck.com/upload/files/234/ls1truck.JPG
http://www.ls1truck.com/upload/files...%20%282%29.JPG
http://www.ls1truck.com/upload/files...%20%281%29.JPG
All that is missing is the front steam hole plugs, rad hoses and a starter.
All that is missing is the front steam hole plugs, rad hoses and a starter.
It is really beginning to look good. I also used AN line with black fittings and a polished Billet Specialties filter
and a few exhaust manifold bolts and gaskets. Hit those manifolds with some brush on bbq grille paint. :thumb:
I have them, I just have to pull it off, blast it and re-install it.
I also have to install the new master cylinder
Yeah really dnnt let those manifolds show that ugly rust
Yeah, I know. I have to pull them and blast them. I was just including pics.
School is just consuming my free time.
Why not run long tubes or some other header? Why the stock manifolds?
well that side shot does not show just how tight the steering is. I could not find any that tack close enough to the block, clear the motor mount and miss the toeboard.