The cool thing is it levels out the factory orange peel and makes the finish smooth as glass. :thumb:
Printable View
The cool thing is it levels out the factory orange peel and makes the finish smooth as glass. :thumb:
Exactamoondo! :ugh2:
Ricky--good job on getting the swirl marks out! :thumb:
You should try doing and inconspicuous spot first--like THE ROOF. Do the clay bar, wet sand (1200 grit and lots of H20), then follow with the 3M Rubbing Compound (like Dale said), and then finish it off with a high grade 3M wax/polish. I would use a variable speed rotary buffer to apply the finishing wax... It would look badass!