Sup Jeff...what about his garage? I saw his truck and know Jon built it. But I need more specific info. Such as what spring rate and other info.
Printable View
Sup Jeff...what about his garage? I saw his truck and know Jon built it. But I need more specific info. Such as what spring rate and other info.
Iv sent Jon texts. He's busy. But will worth the wait
He actually returned my email yesterday stating he was busy and that he would be contacting me today.
Thanks, and I hear that a lot. Can't wait to get this project started.
Sorry I was out on vacation last week. Sent ya a email Jared!!
Thanks again Jon. I want to talk with you today. I'll call you later on.
coilovers ordered today, thanks for all the help
I was talking with another guy who did this on another forum, he went with 10" springs, any reason why you used the 8" over 10" Jon?
I should be installing this tomorrow, time permitting.
They don't make anything above a 800lb spring in a 10". The 8" spring has more options all the way up to 1200lb. There is no ride quality difference between a 8" or a 10". I've tested many combos.
Cool, just the info he was inquiring about. Thanks for clearing that up!
https://sphotos-b.xx.fbcdn.net/hphot...89707788_n.jpg
It brought me down to 5", so I need the spanner wrench to get me back up to 4" for now. Once I get my 2pc DS installed I will put my drop shackles on and minitub
Jon got any 500-600 springs laying around ? getting ready to change mine out ;)
so the coilovers give you like a 2 inch drop right?
and where can I order them ?
bumppp ^ I want the same dropp that gray truck has and go with the coilovers
DB rods, the original poster, sells these.
They give you a 2" drop.
what are you all doing for bumpsteer? are there any hiem joint tierod ends I can purchase
FFR makes heims and Tukn4s on customgm makes some too. I'm debating grabbing a set from either one if I still have bumpsteer.
Why would heims effect bumpsteer? Do they actually mount lower on the spindle somehow? If not I don't see much benefit other than more travel for bagged guys.
I think this is what Jared is talking about, Thanks a lot!Quote:
Originally Posted by ShredSled
http://www.factoryfiveparts.com/adjustable-rod-end-kit/
I know exactly what a heim steering kit is, but I do not see how in our application this can possibly lower the angle much if any...Quote:
Originally Posted by blacstar
google bumpsteer kit and look over the images
From what I gather, the steep angles on the TRE's can cause bad bumpsteer. Whether it is on a lifted or lowered application. I am no expert.
I'm really interested in buying the front coilovers how can I buy them? Please contact me as soon as possible thanks.Quote:
Originally Posted by DBRODS
follow this thread
http://customgm.com/photos/5369-my-n...ered-06-a.html
These would be cool.. ;)
they are...
what kinda set ups are u guys running for the rear?
Any of you have any experience with leveling a NBS with Ridetech coilovers? I might have purchased the wrong setup. I bought some 6.3s (12.33" compressed - 18.63" extended). I was aiming for a ride height of 15" but completely forgot about accounting for the eye to stud adapter reducing my effective ride height to 13.5"....
Is there a way to get ahold of you to order a set of coil overs for my SilveradoQuote:
Originally Posted by DBRODS
You effectively manage your team and conduct specific tasks to have these incredible features and content. I would love to make this my guide. Thanks. 사설토토사이트추천