Thank u Allen , well appreciated.
Printable View
Thank u Allen , well appreciated.
What is the idle AFR? At idle you have to be lean, like 15+. If you're in the 13s or low 14s you'll start to load up the plugs.
when the idle comes down ,im rich on the drivers bank.then it loads up and kicks the po300.you can hear it load up then start missing,and smell it.i just put denso platinums in it gapped at 40 .i never used them ,i always used tr55s for forced induction,but now i m n/a so i dont know what i should be using really.it never does it driving,its always when im idling when the po 300 kicks.it feel like a bad plug to me but these are new.i hope i gapped em proper,for cam ,tune and headers,idk.and like i said i never used densos either.thanks red .
sorry ,i forgot to tell ya i got rid of my a/f gauge with the mods,but it seems i shoulda kept it cus it sire woulda helped me figure this out.
you should be able to scan it and monitor the 02 readings to see if they're pretty close to each other in their readings. You still have HPTuners, right? have you sent a scan to Allen with it idling? I would do a cold start in the morning and scan it for 5 minutes to get a good log for cold start idle.