crank relearn needed

I saw that it is in the bi-directional controls. Check it out over on the HPT website. There are quite a few topics related to it.

Not rocket science , in the scaning section , once you find it hook up the cable connect , crank the engine , scan , hit the crank relearn button , raise engine speed slowly till it reaches 5000 rpm it should cut fuel and then rpms drop slowly , turn key off ur done .

<div class='quotetop'>QUOTE(use2bfo &#064; Nov 25 2006, 03&#58;24 PM) [snapback]74545[/snapback]</div>

Quote:

---

Not rocket science , in the scaning section , once you find it hook up the cable connect , crank the engine , scan , hit the crank relearn button , raise engine speed slowly till it reaches 5000 rpm it should cut fuel and then rpms drop slowly , turn key off ur done .
[/b]

---

Thanks, I knew there wasn&#39;t much to it. I have seen the button in scanner, just never done it.