corvette servo

Since you are on the subject..

How much will it mess with my tranny with the stock tuning??

Im getting a built tranny(4L60e) and a Yank TT3000, will my truck be ok for a lil while without tune ??

Both servos I installed after the first tune so it definitely made my shifts harder/tighter. I would expect the same to a stock tune :eek:

what about getting just a vette servo and billet od servo installed? how would that effect driveability? will i need to install a shift kit with the od servo?

I would definately say do it. With the tune and the shift kit, I actually could chirp my tires from 1-2, but that happened on a rare occasion.

would the vette servo do much by its self.....i want one where can u buy one at?

This is where I got mine. http://www.transmissioncenter.net/

<div class='quotetop'>QUOTE(leochevy2001 &#064; Nov 14 2006, 07&#58;23 AM) [snapback]73519[/snapback]</div>

Quote:

---

what about getting just a vette servo and billet od servo installed? how would that effect driveability? will i need to install a shift kit with the od servo?[/b]

---

Exactly my setup, I highly recommend it. :thumb: :thumb:

Mr. P.

Get the vette servo, the billet or sonnax servo is just too much with a stock stall converter. I should know, it beats you to hell until a higher stall is installed.

later,
allen

I have a Vette servo in mine but i also have a built trans with shift kit and stall. My first tranny bit the dust not too long after I installed the Servo. But the first tranny had over 148000 miles on it ..