Turbo Grind cam has got to go!!!

<div class='quotetop'>QUOTE(RedHeartbeat &#064; Aug 19 2006, 04&#58;48 PM) [snapback]61727[/snapback]</div>

Quote:

---

I am running Manley dual springs with titanium retainers. They are staying for the new cam since it&#39;s going to be over .600 lift. Comp 918s aren&#39;t big enough for this cam. Billy at TRTTURBO can get you a nice set of Patriot Performance high lift springs for a very good price.

You&#39;ll need 7.4" long hardened pushrods for pretty much any comp cam.
[/b]

---

Cool.

Is this too big a cam for the stock 5.3 with 6psi? I have the nelson tune, but the truck is my daily driver so i dont want to overkill it with too big a cam and i dont have a stall converter yet.

-TY

I had it in my 5.7L basically stock engine and it ran fine even with just a crack of the throttle. Allen had it tuned to run pretty good in my truck. We never finished the tune due to my transmission taking a crap on us and a rain storm blew through closing the track down for the night. You&#39;re more than welcome to call Comp with the cam specs and ask their opinion of it in your application. It&#39;s a badass cam and it really sounds sweet. My truck was used as a daily driver and I loved the instant off throttle power it put out. I can only imagine how much better it would work with a turbo in front of it. The tech guy at Comp asked me why I was running it without a blower though. He said it was inefficient without some kind of FI.

ill pay pal ya the money

Sent you a PM to your registered email account.

Still available guys. &#036;250 shipped.

interested in the cam Red! $175 and I'll bring the Volant to TMS Sunday Morning?

Works for me. Just hollar when ready.

Still available if anyone is interested. No contact from buyer.

Quote:

---

Originally Posted by RedHeartbeat

Still available if anyone is interested. No contact from buyer.

---

Hmmm. Sounds familiar...

Back up. Still available if anyone needs a forced induction cam. $225 shipped!