Jeff, so I'll have to do is cut plugs of the dbw harness for throttle body add the wires you have shown with new plugs and I should be good
Printable View
Jeff, so I'll have to do is cut plugs of the dbw harness for throttle body add the wires you have shown with new plugs and I should be good
The DBW only has 2 wires going to the PCM. The rest of the wires in the DBW T/B connector go to the TAC Module (If I remember correctly). So, you need to run 7 wires from the PCM to the IAC and TPS.
Jeff
yes sorry for delay been busy, and yes makes question is answered. Went junk yard and git the connectors I needed for the tps and iac and will wire in soon.Quote:
Originally Posted by Lextech