Crank bolt question

ratchet strap from the balancer then to a support beam above motor or the fender worked for me :thumb:

remove your starter and then stick a big screwdriver through a hole in your flexplate and turn engine by hand untill screwdriver gets wedged, worked for me.

I think on Travis's truck we just threw a breaker bar threw it and that was it. Don't remember how we angled it though :P

Quote:

---

Originally Posted by kerrige

I think on Travis's truck we just threw a breaker bar threw it and that was it. Don't remember how we angled it though :P

---

That was when we removed the pulley...We used an impact to install the UD pulley because it had no way to put a chain or anything through.