LS1 with 862 heads

I don't see why you guys are stuck on PSI numbers, you dont build for how much PSI you want to run, you build for how much power you want it to make. On a street motor I'd take a higher compression and lower boost number anyday. It will come into power sooner and be easier on equipment. What's the big deal if ya gotta drop the pressure a little if it makes the same power.

Well did u buy it?!?!?

Quote:

---

Originally Posted by Frenchy

I don't see why you guys are stuck on PSI numbers, you dont build for how much PSI you want to run, you build for how much power you want it to make. On a street motor I'd take a higher compression and lower boost number anyday. It will come into power sooner and be easier on equipment. What's the big deal if ya gotta drop the pressure a little if it makes the same power.

---

+1
10.5:1 with 10-12psi > 8.8:1 with 20psi

Quote:

---

Originally Posted by Frenchy

I don't see why you guys are stuck on PSI numbers, you dont build for how much PSI you want to run, you build for how much power you want it to make. On a street motor I'd take a higher compression and lower boost number anyday. It will come into power sooner and be easier on equipment. What's the big deal if ya gotta drop the pressure a little if it makes the same power.

---

I started this thread to find out what heads will yield what compression ratio when installed on an LS1 - wasn't concerned too much with the boost. Thanks for your opinions tho

Bonsoir, un ami m’a parlé d’un site qui propose de bons bonus pour les joueurs en France et j’y suis allé sans trop d’attentes. Au début j’enchaînais les petites pertes, puis au moment où j’ai décidé de tenter un pari plus risqué je suis tombé sur https://win-auras.fr et j’ai lancé une partie de Book of Dead. Deux tours plus tard, un gain bien plus grand que prévu m’a vraiment remis dans le jeu. Depuis j’y retourne de temps en temps, c’est devenu une option fiable quand je veux décompresser après le travail.