Sean's (beingblueeyes) Garage

ls6 cam/spring and double roller swap and upgraded oil pump and 34" hd rad upgrade w/ second 16" e fan
[IMG]http://i181.photobucket.com/albums/x...t/DSC01460.jpg[/IMG]
[IMG]http://i181.photobucket.com/albums/x...t/DSC01462.jpg[/IMG]
[IMG]http://i181.photobucket.com/albums/x...DSC01463-1.jpg[/IMG]
[IMG]http://i181.photobucket.com/albums/x...t/DSC01465.jpg[/IMG]
[IMG]http://i181.photobucket.com/albums/x...t/DSC01467.jpg[/IMG]
ls6 cam hot idle (800 rpm) and rev (3500 rpm)
http://s181.photobucket.com/albums/x...t=MOV01468.mp4

so i finally installed my truck dedicated wideband and what it showed my on my fist WOT 1/2 test run (short shifting) surprised me a lot. all the mods Ive done to the motor i figured i would be a little lean (around 13.2 to 13.4) so i only have been running 18 degrees timing in my high oct table and running 91 oct fuel. the only fuel side mod is different maf tables for de-screening. but in the run im very very rich for a good 75% of the time in WOT
http://s181.photobucket.com/albums/x...fbefortune.mp4

powder coated my valve covers today
http://i181.photobucket.com/albums/x...t/DSC01552.jpg
http://i181.photobucket.com/albums/x...t/DSC01553.jpg
http://i181.photobucket.com/albums/x...t/DSC01554.jpg

installed my front brakes and lines tonight and powder coated the calipers (will do the rear tomorrow)
http://i181.photobucket.com/albums/x...t/DSC01593.jpg

started doing the rear brakes to day, when i pulled off the dr side rotar i found a mess from a leaking axle shaft seal so i replaced both sides and powder coated the diff cover and both the calipers. I went to bleed them and messed the bleeder up bad trying to loosen it so i stopped for the day (will post pics tomorrow after i get 2 new bleeders)

http://i181.photobucket.com/albums/x...t/DSC01596.jpg
http://i181.photobucket.com/albums/x...t/DSC01597.jpg

and a pic of our local raccoon "skeeter" that i feed by hand
http://i181.photobucket.com/albums/x...t/DSC01598.jpg

HA i love that oil cap breather, makes it easy to take out for cleaning.

Beautiful job man, truck is awesome.

thanks man

today i installed the drop hangers, it wasn't as hard as i thought it would be. with the hangers installed it now has that nose up cali look i HATE, so im going to drop the front another 2"

http://i181.photobucket.com/albums/x...t/DSC01623.jpg

nice truck dude.

Get drop spindles in front

Quote:

---

Originally Posted by 2boostedSilverado

nice truck dude.

Get drop spindles in front

---

what brand do you recommend 2boostedSilverado?

i will have my 2" drop spindles for sale in a week or so when i get them off.

Quote:

---

Originally Posted by beingblueeyes

what brand do you recommend 2boostedSilverado?

---

I use Mcgaughy's 33004, no problem.

Also heard good things about Belltech 2508

Both are about the same price.

Ask Mic his brand, and try to make a buy there. Usually they don't wear.