It's Alive, It's Alive, Thank God Almighty, It's Alive

Hi flattopwill,

I have the a/c brackets that allow the stock compressor to mount up high on the block. A longer belt was needed to run the additional compressor. The belt I am using doesn't have many sizes in that length... next size up is too long and next size down is too short. Anyway, I decided I am going to remove the pulley from the tensioner and move the hole further outy on the tesion arm. I don't have to move it much in order for it to keep from flipping back.

Thanks for the reply,

Brian

Didnt keniff have a similar problem to this? I think he changed out his tensioner pulley.