First track times with the 07 NNBS

Quote:

---

Originally Posted by keniff

id get a real converter IMO those TB stalls tend to fall apart once
real power is pushed through them. talk to Chris at CircleD an te him
your plans/wants an he'll point you in the right direction.
i have a CircleD 3200 in my CC an i love it. my 60' is a 2.0xx if the G80 will keep locked with good track prep.

i wish i had 4:10s already...id love to see 13.99s with no motor work

---

I disagree. I have had a rebuilt tbss stall from circle d in my truck for over a year putting down more than 450hp and tq so falling apart is a bit of an over statement. IMO

Quote:

---

Originally Posted by keniff

my G80 does the same thing yours does. itll spin both tires but it will unlock after i stall up an then i get like a 3.5 60' bc it wont stop spinning

390 or so from Ron's Machine Shop shipped ;)
what kind of mileafe do you see with those 4:10s?

---

I'm averaging around 17 with the gears, 93 octane tune, And the DoD off

Guess I need to check circle d prices

a STOCK TB stall not a rebuilt TB stall from Circle D, i have that same stall and i drag race/roll race as much as i can. an its actually a smaller case than a TB stall according to Chris at Circle D. i tried to send my TB stall in to have it reworked an he said he doesnt use that size converter.

im talking about a factory I6 TB stall which is the stall that flashes 2200-2600 depending your set up.

my friend has a 13k mile I6 GM converter an all he has is a 6.0/LT-ory/FLT LVL III/ 4:10s and that converter is clacking its butt off an wont lock under part throttle. you have to let of the gas before itll lock up. a stock TB stall is recommended to never be locked up at WOT an i think thats why his is broke already.

if you can get an I6 converter for free then by all means grab it until
you can afford a built converter. i just dont see a point in wasting my time on a Factory converter when i could just throw a better converter in it. jjst my .02 take it with a grain of salt.

oh also call Chris @ Circle D an tell him your on PT.net and its free shipping. i dunno if hes giving discounts for this site or not but your more than welcome to mention that too.
375.00 shipped is what i paid. i love my stall. oh an you can throw in a Vette servo for 20.00 from them.

hey man i have a vette stall and it works nicely its abit over stock nothing to crazy. holds up nicely