Z06 cam in a 4.8

yup,ive gotten a mail tune from allen for my supercharged setup with z06 cam.a/f ratio was good.go for it bro.

Sweet sounds good I will start saving

+1 on not needing a live tune, but a mail order will be just fine. your mods are not too extreme, and that cam is easy to tune.

were did you find your z06 cam? ive heard ebay and looked but didnt find anything, ive found the springs but not the cam, is there a store that sells them? any help would be great thanks man, i plan on throwing one in my 4.8 also:hyper2:

If you do go looking on ebay for the Z06 cam beware of a seller out of Dallas that sells "fresh copies" of cams. They are junk.

I got mine off craigslist with the yellow springs for 200 bucks

Quote:

---

Originally Posted by RedHeartbeat

If you do go looking on ebay for the Z06 cam beware of a seller out of Dallas that sells "fresh copies" of cams. They are junk.

---

I must say though, i bought one of those cams with the 112dg LSA from that guy in Plano, and then ended up selling it and a set of springs to a friend of Gteran1/gorge. . .and he said it worked great. so i might have gotten lucky.

but if you looking for a cam, there is an LS6 type GM Hotcam on ebay for cheap, comes with springs and everything.

Quote:

---

Originally Posted by molitor

I must say though, i bought one of those cams with the 112dg LSA from that guy in Plano, and then ended up selling it and a set of springs to a friend of Gteran1/gorge. . .and he said it worked great. so i might have gotten lucky.

but if you looking for a cam, there is an LS6 type GM Hotcam on ebay for cheap, comes with springs and everything.

---

Thats what made me worry about the cam I got from you. I saw the box said 2002 zo6 112 lsa.....which only he sells...lol

Quote:

---

Originally Posted by 02SS

So i have the z06/ls6 camshaft and the matching yellow valve springs. Is there anything else i need?

Thanks,

Mike

---

Hardened pushrods

I heard it would run fine with the stock pushrod since I don't have any major upgrades