where quality KY at?
Printable View
where quality KY at?
45 Miles west of Bowling Green. Just west of a little town called Morgantown in Butler county.
Found that but witch plug???Quote:
Originally Posted by WARLOCK
http://www.eficonnection.com/eficonn...es/obd2vss.jpg
http://www.eficonnection.com/eficonn...ss_pigtail.jpg
You are up there were I will get my drive shaft done. "GLASGOW"Quote:
Originally Posted by kyhunter89
This might help too. These guys have the 4L60E to 4L80E wiring harness adapter. The web page is LONG but its on there.
4L60E Performance Transmissions from PATC
Its the top one
Nelson Performance sells the wiring cheaper than PACT
There are posts on how to modify your 60e PCM to work with the 80e transmission. You can also reuse the unused 60e wires to carry the speedometer signal to the PCM, just have to move the wires around on the PCM end and splice the ISS connector into the unused wires at the trans end. :twocents:
Using the adapter is easy and adding the new ISS sensor wires to the PCM isn't very hard, either.
5.3 ready to go in. Putting the truck in the shop tonight. Thinking would it be worth the time to buy all new sensors and put them in or not. Also scenes this is going to be a Blower Motor worth the time to put in a cam. The truck will only be street driven and pull a 24 foot enclose.
Toss a z06 cam in it. Very FI friendly