Quote:
Originally Posted by sleeper1500
Probably my power sponge auto trans.
Printable View
Quote:
Originally Posted by sleeper1500
Probably my power sponge auto trans.
Nope--no rubbing or bottoming out the leafs on the bump stops or anything...Quote:
Originally Posted by duckysbht
No Dave--I have stock suspension with 2" leveling shackles in the rear.
Girl, I was towing trailers like that before you were out of Elementary school. You should have seen my irrigation trailers back when I had my lawn maintenance company--dual axle, 22' x 8', dual pipe racks, parts bins down each side, toolbox up front, etc--all on a bumper pull. I had an F350 SRW CCLB 7.3L Powerstroke 5 speed manual to haul it around. When loaded with trenchers, boring machine, pipe loaded, etc---I weighed 16,400 lbs (including the truck). I could pull up to 18 wheelers and be just a few feet short of matching up lengths.Quote:
Originally Posted by Aggie
hey you build that house in the back ground. That is freaking nice. 4 car garage I need one built please.
must be nice not to rub. I can usually fill up the bed in mine and only rub when I hit pretty good holes.
....and after putting Ryan's (banker99) truck on my lift I wonder who's is lower....
did yall do his servos
He said he already had them.
We swapped converters.
Where is he anyway?
Runs good. Sounds good. Brake stalls about 500 RPM higher. Noticably looser at slow speeds. He should tell the story.
****s weak T :lol:
No Mark, I did not build it, I designed it. I also designed the advertising board in the front yard. :DQuote:
Originally Posted by murdered_outgmc
But anyway, those are condos. 2 and 3 bedroom condos with a 1 or 2 garage. I would never design a house with a 4 car front facing garage! Besides, most of the development's HOA I design in do not allow any front facing garages...
EAD G.