I peeled mine right off and no glue left.
Printable View
I peeled mine right off and no glue left.
Yea I think ill go with the hairdrier and a little paint cleaner! Thanks yall for the suggestions! Yall know ur chevys!
lol i have been doing vinyl for 9 years now
yall forgot the all important eraser wheel. They can be purchased at you local paint and body supply. Use your cordless drill and dont let it set too long in one place.
Quote:
Originally Posted by murdered_outgmc
on vinyl its a waste to use the eraser wheel when you can use some adhesive remover that will melt the little bit of glue that will be left by the vinyl...spray on let it soak for a minute or 2 then wipe it off...use the eraser wheel for that styrofoam tape crap
yeah the double side tape $hit, comes off like butta. but yeah vinyl is easy.
+ 1 Works like a charm..Quote:
Originally Posted by Red03SilSS
spray a little lighter fluid on the viynl, light it of with your zippo and let the letters soften up a bit.
then what you want to do is get a putty knife and start scraping it off, be sure to hit it from all angles . You might need a small hammer or mallet to assist with this step.
Next, as mentioned before is the angle gringer. Now I prefer the 7" over the 4.5 or 5 grinder but it's up to you. Start with a hard grinding disk to get the any of the "heavy" product that is left , then go ahead and switch to the cup brush to finish it off. Now you'll want to be gentle while preforming this step, there is a 1% chance that you might scratch the paint. But dont worry it buff right out.
:polish2:
That sounds a little rough.
http://i155.photobucket.com/albums/s...hevy15/007.jpg
Came right off with a little paint cleaner and a hairdrier. The grinder might would have worked too.