long tube headers--- more low end
Printable View
long tube headers--- more low end
All uncoated headers will eventually rust on the surface but good ones don't fall apart....at least in Texas.
Looks Like Were Good In The State Of Texas Then
Do you have options for collector flanges? Will 3" pipe fit inside the header collectors or do they have to be swaged?
Hey Red, The outside diameter is 3" the inside is a little less than 2 7/8"
Welcome aboard Shoenfeld!
The headers come empty on the end, but I'd recommend getting your exhaust shop to spread the connecting pipe out to fit over it, then call up NAPA for some band clamps. The clamps are about 4" wide and have two bolts on them and will seal up the connection.
PN on box: 733-3967
TorcTite
Hey Grayson, sent you a pm on the nbs headers.
thanks,
allen
have you tried to test fit them on a 73-87 4x4 yet. is not, send me a set and i will try them out
Quote:
Originally Posted by cash talks
They're for 88-98.
those look good
Some nice long tubes from Schoenfeld...:)