Printable View
Thats cool. Thanks anyway.
I have a few q's
When i bought the engine there was a section cut. I see theres no MAF plug, tranny plug, vss, or 02 sesor plugs.
Maybe some one can confirm this for me...any ideas
http://i331.photobucket.com/albums/l...2/100_1023.jpg
the other q was the ecm i have came out of a 2002 2500 silverado 4x4
can i still use this if i want to run the 4l60e... the tranny that came out of my 93 chevy.
The first Gen3 engine in my 92 was an LS1/4L60e, 2nd was a 93 with LS1/4L60e then a 408/4L60e and finally an 80e. Next truck was a 6L/4L60e and the current project is a 5.3L turbo/4L60e. As for the wires missing on your harness, I have a stock harness I could check for you next week but I'm going to be truly busy to no end until then. If you haven't got it figured out by then give me a hollar.
Welcome to the site. Gotta love obs swaps.
Welcome to the site.
You're closer than most of us...LOL:ugh2:Quote:
Originally Posted by banker099
thanks, and i would appreciate any help I can get with this swap.
I'll get back into thinking mode tomorrow when I return to work.
Check out our Swaps section. There have been several people who have done the same swap you have. Get into those threads and start reading and asking questions!Quote:
Originally Posted by rammor02
wel:puke:come sorry all these texans make me sick :laugh: good luck on the swap.