Printable View
Slicks baby!Quote:
Originally Posted by Wtfan18
my street tires are bfg all terain's I can spin both of those babys past 330' at the track!
One of these days I will get some better street trim, but I dont really race on the street, except some highway pulls, so its not an issue.
Here is a 10.0 1/8 with street tires.
Video of NO BITE.. UGG.. - Photobucket - Video and Image Hosting
oh no kidding! thats awesome!! i cant wait to hit the track i just hope my POS stays together... haha.
Quote:
Originally Posted by Wtfan18
It will stay together! Get that thing to the track, I will tell you though full weight and stock exhaust manifolds I ran 9.1's 1/8 with 4.10's and 3k stall so without the stall and gears I would think you will be around 9.6 1/8th
NM you are manual! Burn some clutch man!
hahah whats that supposed to mean...Quote:
Originally Posted by -HIC-
as far as my truck goes right now this is whats on it...
i have the same cam as you...(tr220/220 .553.554 112lsa) dual patriot springs, 7.4 rods. under drive pulley, EFANs, K&N intake,(friday), nelson perf 91 tune, 2.5 inch duals to the corsa sport muffler and a 2 3/4 out the rear right. t-56 ls7 clutch new slave cylinder, shorthrow hurst shifter 4:56s Auburn LSD on 285/30/20 BFG KDW DR's that hook like a mother F***** unless i dont want them to. i have no idea what is a good time in the 1/8 but my goal is to be somewhere in the 13's in the 1/4 i have and 1/8 and a 1/4 within roughly an hour of my house so ill be doing some runs soon i hope! i dont really want to run the 20's because they are HEAVY AS HELL but until i get some other rims/ tires i dont have much choice. ill take the Tonneau off for sure that thing weighs probably 150lbs... maybe take the pass seat out and the console. probably save me another 100lbs. so you think high 9's in the eighth?
Actually with all that stuff, I would think you would be in the mid to high 8's in the 1/8 and mid to high 13's in the 1/4.Quote:
Originally Posted by Wtfan18
Quote:
Originally Posted by MKader17
Did you go with the wait4me tune??
Quote:
Originally Posted by vv8
Hmm.. .we might be waiting for him at the finish line! :LOL:
Kevin, you still got my number? Give me a call when it get's a little cooler and I'll meet you guys. This will give me a little time to get some slicks from M&H to play with. I'm going to try these 390/40R17.
DOT Certified
TUBELESS
Comparable Race Size 12.0/29.5R17
Tread Width: 12.5"
Section Width: 14.3"
Diameter: 29.5"
Circumference: 92.7"
Rim Size: 12.0"
Code: ROD-09R
http://www.mandhtires.com/sc_images/.../295_image.jpg
you can use mine my man.. they are only 28x11.5 but you are more than welcome to use em...