CAI and efans

Quote:

---

Originally Posted by 567234ta

thats how i had my truck setup before i did the swap. the elec fans were controlled by a thermo probe that stuck thru the fins of the radiator and a switch on the dash so i could turn them on whenever i wanted.

the reason i say use a relay is so you arent having to run the power needed for the fans thru a switch. they use alot of amps and its not good to have that much power running thru your firewall and dash. its pretty easy to setup on relays and much safer.

---

it doesnt run through my firewall plus i have a 0/1 gauge power wire running through the same area as this 10 gauge wire so im sure its fine. works great! i have a fuse before the grommet on both wires so itll blow and cut power if it faults out some how.